The Jalopy Journal
Recently, I put on a Holley 12-501 fuel pressure regulator (one inlet, two outlets, for carbureted vehicles). It came from the factory with a...
"Crazier'n a pet coon" "Does the Pope wear a silly hat?" (response to dumb questions) "I didn't know whether to shit or go blind" (confusion)...
I've got a question about removing the stock bench seats. I seem to recall a discussion on the HAMB about removing the wraparound floor brace...
I had to add a bigger radiator in my '52 Chevy to deal with the 327 swap. I used Portell's Radiator in Missouri. A four-row radiator ran...
I ran into the same issues while lowering the front of my '52. I had already deleted leaves in the rear and added lowering blocks, but the front...
I thought it was off a van of some sort, but I suspected a Dodge. A VW box is a good thing, right? I've seen other threads that talk about the...
Anyone know what steering box this is? I'm looking to rebuild this soon. Thanks.:)
I had some pretty strange stuff in my tank when I got my truck out of storage a few years back. I pulled the tank, removed the sending unit and...
BTW, the pitman arm hangs outside the frame, but I couldn't get a decent picture. I'm using a GM tilt column hooked to a standard steering...
Can anyone identify this steering box? Any help is appreciated. Hope these thumbnails show up (its my first crack at it, so be patient).
I've got the 300-hp Crane Blueprint cam. In the last week, I had a compression check run on the motor. Overall, I was getting 85-90 lbs "dry"...
I always loved the part in AG when Milner finally decides to race and looks over and says "Paradise Road." Two words. Way frickin' cool. :cool:
So if I need to strip it off, what's the best way to do it? I had several coats of primer on before I painted.
The brand is called "Shop-Line" by PPG. I used a fast drying hardener, which I thought would stop any effect from gasoline (I talked to the body...
Help! Last weekend, I shot a motorcycle tank/fenders, etc. with PPG "shop grade" single stage metallic silver. I let it dry all week, didn't...
So today, I take the pickup in to the local garage (good ol' boys that understand this kind of stuff and do tons of carb work) to do a fuel...
Sounds like you've got a problem on your hands. First off, when you go for your first court date, plead "Not Guilty" and ask for a trial. That...
I've checked some of the past posts on this issue, but can someone tell me-- are Edelbrock carbs (600 cfm vac. secondary, electric choke on a SBC)...
Does anyone know what runner size the 1.72/150 heads have? I'll use the stock heads if a simple valve job and new springs is not a total waste of...
I had my pickup in storage for many years and I had major vermin problems in the headliner and under the front seat when I got it out. I sprayed...
I've seen Holleys work great if the floats are set perfectly and everything is tight. If not, they leak and are a pain. Quadrajets can be killer...
I've already pretty much eliminated electrical and carb issues. I set the valves running and everything appeared to be opening and fully closing,...
I joined the H.A.M.B. a day or so ago, so I just put my intro on that forum. I've got a question about Chevy cylinder heads. Here's the story....
Separate names with a comma.
The Jalopy Journal