The Jalopy Journal
Weiand wc4d sbc intake with holley 94 carbs. Brand new bases power valve delete. Set up with straight linkage. Brand new air cleaners with the...
I have this intake on my 55 chevy. Running straight linkage with Stromberg 97 knock offs 42 jets on a 327 4sp with 3:55 gears. Still working out...
Excepting offers
Bump
This is on a six deuce set up
They came highly recommended for my 6x2 intake. Guess we will see.
Anyone ever use these on secondary carbs?
Stromberg 97 carbs. All cleaned new accelerator pump gaskets, needle and seat. Will give a discount if you buy all three. 1 primary with choke 2...
No sir. I will give one more hint this 4 deuce intake has the oil fill tube with a breather.
So spring is here and the car still would not idle. I figured out the problem! It has to do with the aluminum pipe going into the side of the...
Another side shot[ATTACH]
[ATTACH] Well finally dialed it in for now. Stock 45 jets was way too much fuel. Dropped to 42 and seems to be running good. Wont be able to fine...
Yes that was one of the problems I had. The power valves were leaking and flooding the car out. So I bought plugs to block these so they wouldn't...
Well I got my linkage figured out. The car stops and starts with no heat soak. Actually starting and stopping the best ive had it in the garage....
This is what i did but its still binding. Figured I need to go off rear carb. But throttle shaft was cut.[ATTACH]
Im trying to run straight linkage how has everyone hooked up the gas pedal?
This is just the 2 primary carbs when i bring in the secondary it really comes alive.
https://youtube.com/shorts/FjZf57nAH8A?si=o7imh8tBzrJidDjS
How do you upload a video?
With the straight linkage how did you hook up the linkage to the gas pedal? Sounds good on the motor stand
Just read an old thread dickster was the guy that built this setup for me. He came highly recommended and built alot of these intakes on...
Any picture of this intake with straight linkage?
Interesting the guy that built this setup said he had good luck with this setup. I had no reason to argue with him. But Charlie at vintage speed...
Runs 2 center carbs as primary as you move primary linkage it then grabs the back carb and that rod moves front carb to
Here is the linkage.[ATTACH]
As far as the linkage goes or running the carbs progressively.
Im going to try it this way. The guy that made the linkage was pretty creative. Ive never seen this intake before on another car so i have to go...
That guy has since retired and when I called charlie at vintage speed he wanted to see pictures because he always did straight linkage.
Its what the guy I sent my assembly did.
Regulator
Separate names with a comma.
The Jalopy Journal
