The Jalopy Journal
Turned out to be a '78 Caprice. Go figure.
So I got this 54 chevy pickup. The guy who put it together said the front clip is an '81 Camaro. I took numbers off of the steering box, spindles,...
Time to replace some wood that was finished and installed some 20 years ago. Its got some kind of clear coat/varnish on it and its delaminating....
I have a 64 c10 which is missing the T bar and connection hardware for the rear brake cables. The crossbar/pivot is there. Anyone aware of a...
I have access to all the major vendors' commercial catalogs and they all show the 7018 part number but those are not what is on the truck. These...
All the local stores have a part number 7018, but it's the wrong kit. Springs are all too small. Anyone have a good part number? 11X2 drum brakes.
I have to replace the door relay and handle on a 54 truck because they are both stripped out. This has the handles with the screw which kept...
Like I said, the system is working fine now, I just can't explain what was happening in the moment.
See, that's the weird thing. The pedal did return on the return spring. It felt like installing a master without bleeding it, or like there was a...
I got this '64 chevy with a new disc brake conversion that never saw the street, and sat for some years. Took it off the trailer with no brakes....
That's what I'm saying, but this guy is pretty insistent on a brake booster. Everything else is done.
Anyone have any luck with a 90* under dash set up?
corvair steering 350
I'm trying to figger out a booster/master solution for brakes on this thing. Before anyone mentions it, No, I cannot mount it to the frame under...
C4. Yes.
Anyone know if there is a Ford factory production 302 flywheel with 157 teeth and a 50oz imbalance? Or an aftermarket stamped steel unit? I'm...
So ultimately I made the decision to go 157T. 50oz Flexplate and separator plate from a local vendor, 11" 24 spline converter from my buddy and a...
The Bellhousing was on the transmission with the wrong convertor, probably out of a C5, which is what the tranny builder insisted the bell was...
Thank you! The Granada had a 164T flexplate. Even if I identify a 24 spline convertor cores is a problem. I have an 11" convertor, so if I cant...
OK so here's what we got.... 302 Ford w/50 oz 164T flywheel. '66 case fill C4 w/24 spline input shaft and '77 164T bellhousing. I've been looking...
I'm staring at a pile of parts. I have a Ford 302 with 164 tooth flywheel and a C4 with the RF-D7DP-7976-AA bellhousing. I'm having difficulty...
I'm looking online for a replacement column for a truck and I recognize brand names like Ididit and Flaming River and I also recognize the price...
Can't seem to find any. I have a '49 with a Pertronix unit in it, and I'd like to replace the stock type wires with a modern style wire. Anyone...
Searched... couldn't find it. I need to make some axle relocation plates for a 1953 Chevrolet 3100, but I can't remember the spec for the offset...
I'm looking to replace a 2V carb on a ford 302 with a tag that reads D3MF-EA with a suitable Holley unit. I can't seem to find the CFM rating for...
This unit is stamped C4AE-6375-B I have counted the teeth multiple times and it is in fact a 160 tooth flexplate. I cannot find a replacement for...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Restorer's/Hot Rodder's dream. Fantastic...
Thank you sir.
Anyone have a good auto parts store part number for the bypass tube in the intake manifold to the water pump? The Ford PN doesn't cross over....
HA!!!
Separate names with a comma.
The Jalopy Journal
