The Jalopy Journal
I can see that. Definitely won't be a daily commuter as a raised straight axle car with an 85" wheelbase, and 45" track. I'd imagine it somewhere...
Figure about 43' of 2x3 .120 wall to give the little uni body some much needed support... as the floor pans and sheet metal c-channel were 70%...
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
Started putting together some parts and pieces for a fairly in depth, lengthy project. Since the donor car is so far past its prime, I don't feel...
Most of the Rochesters were designed to run a I6 or V8 solo... the intake used the older smaller carbs for fuel.
Get a board and mount 6 gauges. Tuning isn't that problematic. Jetting is the ass pain... once it's set you don't need much maintenance to keep...
1900 by 2bbl specs, roughly 900 by 4 bbl conversion.
I ran all 6 with non progressive linkage on a 350 with 041 heads and 292 siamesed cam with a M21 in a 4100 lb car, it bogged a lot under 2500 and...
Anything without a choke that when multiplied by 6 won't wash your cylinder bores.
I'm running 2G carbs.
Thanks.
Out of curiosity, what kind of numbers were you looking at and did they modify the intake ports at all? Curious if the intake manifold was opened...
I picked up an Edelbrock 6 2bbl crossram intake with 6 Rochester 2G carbs and 1" spacers for a small block chevy. Its currently set up with non...
Separate names with a comma.