The Jalopy Journal
Hi King Ford thanks for your reply, ive done a compression test and all cylinders are between 108-115 psi, I will pull the valve cover off and...
Joined: Nov 8, 2014 Posts: 31 Profile Page Clean Kev Member from United Kingdom The smoke is a blue colour and smells of burning oil, im...
The smoke is a blue colour and smells of burning oil, im wondering if there is a valve issue? I think the misfire is on one cylinder as the plug...
Hi Guys, before I go ahead and shoot my 51 Cadillac with an AK47 I would like to pick your brains. My problem is I have an intermittent misfire...
ok cheers Stimpy and Harpo1313
please read my first post locknar?
is there a set rule about how far the starter gear goes across the flex plate ??????????????
Its a fresh built 305 that came without a starter. Its a 153 tooth flex plate with a straight bolt pattern starter, if the shop guy has issued me...
its snowing guys o_O
part number was BYN3838 but that may be the shop part number
no its not a mini starter it's a full size starter not sure if it's GM though.
Hi guys ive just bought a new starter motor for my Chevy 305. It's all bolted in but written in the fitting instructions it's saying that the...
Yep sorry guys
Jim can you tell me where I can get a crossmember for my 700R4 transmission to fit the 63 C10? Cheers Kev
Ok Jim thanks for the info.
Hi again guys, here's another question for you all. As some of you might no lol im putting a SBC into my 63 C10 fitted to a 700R4 transmission,...
Cheers Saxman
So obviously the 230ci rubber mount also fits the sbc V8
Wow that was clever Saxman :D
Thanks for helping me Jim, sorry it took a while to sink in. Just don't do this often. Cheers Kev
Yes Jim I can understand that now, but was asking why there was another separate set of bolt holes for another V8 mounting bracket further forward...
The V8 has nothing on it Squirrel? I think im slowly getting it but would the V8 be in the correct place if I used the existing frame brackets as...
From what I can see the other holes are for the V8 frame brackets , im I correct there? would these be what I need ????????...
KJSR I have read there comments and as I explaned im new to this so there comments are a little confusing to me sorry. Here are the photos of what...
Will put some photos on shortly saxman, cheers Kev
I just checked the frame mounts and they are both bolted on to the chassis. So basically nothing I have is any good for the V8, so I need frame...
Even the rubber mounts are different, the 305 V8 is from a 83 Iroc Camaro if that helps?
I just looked at the 6 cylinder mounts and the V8 mounts and the 6 cylinder ones wont fit the V8 because of the V shape on the block and it would...
Hi guys, im in the process of putting a Chevy 305ci V8 into my 63 Chevy C10, can anyone tell me is there an engine mount that fits both the 305 V8...
I cant seem to find anywhere to decode the block numbers, I have 473483 on the side of the block and F0716TAJ on the flat plate near the...
Separate names with a comma.
The Jalopy Journal
