The Jalopy Journal
Ok thanks I'll give them a go Sent from my iPhone using The H.A.M.B. mobile app
Just wondering can you get the Thomas heads again or still not available as yet Sent from my iPhone using The H.A.M.B. mobile app
Hi dose anyone know who also has the over sized inlet valves? I'm after some and Charlie Yapp is out of stock.
[ATTACH] Was that the sort of bracket you were after
That sounds good thanks. I plan on running hairpins so that will work fine.
Hi iam looking at fitting a 4 inch drop axel to my 30 a ccpu and was thinking of useing 39 spindles as I am running 39 brakes to get the steering...
Thanks for the info. Sorry it's f1 has big nut on sector shaft holding pitman arm and steering start at bottom of box. I'll have a look in some...
Hi I've picked up a 48 f1 steering box for my av8 and was wondering if anyone has pics for fitting to the a Chassis and mods to the steering box...
The supercharger is a Toyota sc14 all self contained no oil feed needed. Yes that's the boost I was thinking 4 to 5 should make a nice little...
I was pondering about fitting a supercharger to my pickup wondering if anyone else has done it and or had any luck [ATTACH]
Thanks for the info guys I for got to say I plan on fitting one in an av8 Iam building so would a 48-52 put the box lower for more room near the...
Hi looking to fit a f100 steering box wondering what year is best to use? And dose anyone know who has them ready to fit I seen one on eBay who...
Yes standard a rear end is already running juice brakes so thought I will just stick with it
Thanks grim1930 I will check it out
Hi all iam wondering if I can fit the flat head with out haveing to cut up the fire wall. I plan on useing the Standard rear end with a 39 trans...
Maybe a bill stype 340 touring cam might sute what you're after
I am running a lion 3 iron head there listed as 6.5
[ATTACH] I built my own engine Iam from Horsham vic. Bill stype is another good one for parts he sell new improved cams. And this book is a good...
It's a 1925 bsa
Got my overdrive last week [mmrjDe3aATTACH=full]2977727[/ATTACH]
[ATTACH]
And give the engine a paint job[ATTACH]
Sorry haven't been any for a while have head fitted[ATTACH] An idear of combustion Chamber difference[ATTACH][ATTACH]
Hi waxhead I haven't run both but I have just fitted a lion 3 head and really like it
Yes Iam very happy how it goes have a stype cam as well and plenty of get up. Just fitted an overdrive and pulls that well
Vf4 are u running a cam as well ?
Hi larry how are u finding the lion head on your set up. I have recently put one on mine[ATTACH]
Ok thanks will do
We're did u source the 81's from IDE like some for my project
[ATTACH] Iam running a lion III also
Separate names with a comma.
The Jalopy Journal
