The Jalopy Journal
I'm not sure what the camber and caster numbers are. I probably need to take it somewhere different to be aligned. The shop I took it to didn't...
I don't have pictures of the suspension. Yes it's been aligned, but still has some negative camber. There wasn't an adjustment to get rid that....
Hi folks, I have a 53 Chevy 210 that I have lowered by stepping the lower a arms and cut 1.5 coils. Since this the car darts and the steering is...
Update...aligned really well, drives great. Now I'm ready to cut another 1/2 coil. Never satisfied
Updated pic after installing New stock sprinGS with 1/2 coil cut, stepped lowers and 3" rear blocks. Very happy with the stance but I have to...
Thank you Sir! I would love to stick with the current situation following a successful alignment. I may try removing the bump stops and getting an...
Niceguyede, is there enough factory adjustment to get this thing aligned?
I lowered my 53 today with stepped a arms and cut 1.5 coils from the front springs. It turned out lower than I anticipated. I'm trying to decide...
Anyone have thoughts on installing a Wells VR715 solid state regulator with this Autolite GJC-7002F generator? It's been running for years with a...
Thanks, now I'm on a mission to find a solid state regulator that will work with an auto lite GJC-7002F generator
It's is a Delco regulator. Wow, thanks for the recommendation. Is that VR-206 a solid state regulator?
[ATTACH]
Ok that's good info...so if I want to replace the existing regulator I should get one for a 55 Chevy?
Gotcha, I'm pretty sure its a 12v generator. If I could get the voltage down a to a safe level I'd be more than happy with the generator setup....
I'm not sure which generator it is, I will check and post pics when I get home. jcmarz: I just said it was the way to go because every article I...
I think I will try adjusting the regulator tonight to get the voltage down and if no luck I will go with a one wire alternator. That seems to be...
Battery is good but it's new. Do I buy a replacement regulator for a later model car since I'm 12v now?
I Have a 53 210 with 235. It's been converted to 12v but not so sure it was done properly. Seems it has the original generator and voltage...
Thanks 3lsBoy..how was your ride after stepping and cutting?
Thanks to this thread I'm about to step the lower A arms on my currently stock 53 210. I wanted to get opinions before ordering my other...
Thanks for the info guys...yeah I called and they said they make the stuff after its ordered so it sometimes takes a while.
Hi, I hope I'm in the right section. I have a completely stock 53 Chevy 210 2 door, 235. I am looking to lower it on a budget, and I've read about...
Separate names with a comma.
The Jalopy Journal