The Jalopy Journal
How did they get the Chevy truck rally wheels on the front?
2 drivers, 2 passengers
It looks a lot lower in the front now than it did in Lost Hot Rods article.
Why did the church sign go all weird?
"Bring out your dead" Just saw the date of original thread, hope Stevie figured out his running boards sometime in the last 15 years.
https://www.americanfloormats.com/corrugated-rubber-runner-mats/ How about something like this and make your own.
My dad grew up in Irving, Texas in the 40's and would go exploring what they called "Isinglass Hill" and collect mica chunks. The hill is now...
Maybe the remnants of the script lettering on top of the nose is a good clue?
[ATTACH] What is this?
4-bar on front? What year is that from?
You could try to reach in the transmission with a small screwdriver and see if you can rotate the gear on the shaft, kind of like adjusting the...
[ATTACH] [ATTACH]
I actually had no clue what it was, just bored at work. Your post about 60's to 70's cars, but not GM of Mopar cars (holes) just got me to search...
69 or 70 Mustang
Wouldn't it require less torque to turn being further from the center of the axle on a lug, someone else can do the math. You might actually have...
Even has the same tires:)
Is that aluminum foil on the windows, to hide the unfinished interior?
Plastic front license plat holder? Looks like someone was trying to get it on the road somewhat recently.
At the bottom of this mine lies a big, big man, Big John.
Come to think of it, nobody has ever stolen my metering block out of my holley carb either!
[ATTACH] Make a plate with milled fins to match the spacing on the dash. Polished aluminum or chromed steel and blacked out lows.
Look how he's holding the wheel!
Might also add to support the back of engine, under the pan, to prevent it from dropping down.
Spell check is traditional!
Did this guy work on the brakes also? Looks like the pushrod from pedal to master cylinder is just stuck on with no nut securing it, and the...
If you shorten the pushrod, make sure it doesn't bind in the master cylinder bore during full range of travel.
That tie rod looks pretty small in diameter and has several bends to clear the frame. Could be flexing quit a bit when you hit a bump and causing...
Just cut that much off the opposite side.:)
Did you change the other side while you were in there? Might not be far behind.
These headers hang pretty low to the ground. If your truck is lowered, they will probably drag on speed pumps. I think since they also fit the 292...
Separate names with a comma.
The Jalopy Journal
