The Jalopy Journal
All spot welded moving around, looking down the panels I don’t feel I have any warp. Larry, you’re the second person to mention heading with a...
Thanks for the input guys. I tried to research but didn’t run across the correct wire to use.
Newbie here attempting my first chop. This was mig welded. I tried to hammer and dolly some but it didn’t seem to lay the weld down much at all so...
Looks great man, getting close!
[IMG] Bayou Goula, LA Sent from my iPhone using The H.A.M.B. mobile app
I used the bolts that came w the power master starter I bought. I heard a slight grinding noise, so I decided to torque the bolts. Set the wrench...
[IMG][IMG] Sent from my iPhone using The H.A.M.B. mobile app
My first mistake was breaking an extractor bit from the bottom in the center. Then I drilled from the top all the way through. Due to the location...
I’ve broken the starter bolt off in the block and I have not been able to get an extractor to work. If I drill and tap a 1/2” hole for a sleeve...
Thanks for the pic four5four. I like the direction yours is headed. Sent from my iPhone using The H.A.M.B. mobile app
The speedway add says it's for a Model A, so i assumed it was flat?? I do see the curve in the picture though.
Thanks for the responses. I thought a custom frame would be out of my price range, and shipping for the boiling bros. frame kept me away from...
Does anyone have any input/experience on the 32' frame for a Model A from Speedway? My channeled 28' is currently sitting on an amateur job and I...
I used a small butane torch, worked fine once you got the hang of melting the solder and not melting the coating Sent from my iPhone using The...
Thanks for the info, I thought I may get knocked for the sbc not being traditional . I’m still learning what’s correct for each period, I’m just...
Thanks, worked great. Sent from my iPhone using The H.A.M.B. mobile app
What are you using to spread? I’ve tried twisting a screw driver in the slot to open it up, but still tight. I wanted to leave it bare metal so I...
Is it normal for the limeworks column and drop to fit really tight? I’ve tried grinding and lubrication but the drop doesn’t slide smoothly down...
Hey man I’m new and from LA too. Nice ride! Sent from my iPhone using The H.A.M.B. mobile app
I’m also new from south Louisiana. Finally pulled the trigger on my first hot rod. It’s not totally traditional, but it’s a start. I’m in the...
Separate names with a comma.
The Jalopy Journal