The Jalopy Journal
Here's my 29. A green over a black primer. [ATTACH]
Yea, just have to pull the third member Sent from my iPhone using The H.A.M.B. mobile app
It’s vented [IMG] Sent from my iPhone using The H.A.M.B. mobile app
I should of clarified.. sorry. That was the only way I’d see a seal work. There’s no more room at the axle end Sent from my iPhone using The...
Or if there was a thin gasket behind the axle that might work? [IMG][IMG] Sent from my iPhone using The H.A.M.B. mobile app
There’s definitely no room unless the seal was to go down in the tube Sent from my iPhone using The H.A.M.B. mobile app
I have a Ford 9" RearEnd in my 32 which I have only take fully apart because I was informed it was 'ready to go' It has the 3.149" O.D. Sealed...
I actually found a front spring pad at the Early Ford Store of CA. Gonna go that route
Well, my frame is notched for the spring. I was thinking there would be enough for 1/2" - 1"? Also, it's steel to steel. I know I probably...
Thinking remove and pop a couple of these in the bottom under all the springs. https://www.speedwaymotors.com/Leaf-Spring-Spacer-1-3-4-Wide,5230.html
It's a SBC 350 to a 700r4
I'm a little leery on the mono leaf, nothing against what you are running though! I'd rather just adjust mine to try and get where I'd be happy.
Been sitting for about 6 - 7 years... Not that many miles.
Hi - I have the 7 leaf spring front end (whole front is a Pete&Jakes setup) and would like to try and get it down another inch. I've read on...
Something like this would work perfect. Now just to find![ATTACH]
I have a 32 Ford Roadster (w/ glass body). When going down certain roads, the doors shutter just a tiny bit, and get annoying. I temporarily put...
well, just wanted to put out there I flushed the lines with denatured alcohol and cleaned out each of the calipers by removing the pistons and...
i have BRAND new Wilwood brake calipers on my 32 hot rod. I am running dot 5 in an entirely new stainless brake system... with no leaks except...
12 Volt. Running 2 gauge for both positive/negative. Each is about 7-8 ft or so of wire. If anything I will run a higher gauge wire up into my...
Thanks guys! I was thinking it would probably be OK, but wanted to see if there was a drawback.
So, I have a trunk mounted battery, and am running a 2 gauge positive & negative up to the starter. Then from the starter I have grounding straps...
Looks great!!! Really like that tinted primer!
Gotcha! It was raising my eyebrow as I was guessing what it was...
Found this in the bottom of a box of parts. Looks like it maybe goes to a puller? Ideas? [IMG] [IMG]
Here's a pic a couple weeks ago. Gotta say, it's one of the most enjoyable projects I've ever worked on. That being said, I have always loved...
Yep, I will file it hopefully this weekend. I got the flu earlier this week and I've never had the flu before, so it's really kicking my ass!...
My rad is currently sitting out at the bottom as far as possible. Should I look into slightly enlarging the two mount holes on the frame a bit?...
I ended up ordering the Bowties Overdrives lockup controller. Thanks for the input guys!
AH that one probably won't work for me. I was planning on using a gps speedo. I currently don't have a speedo cable and wasn't really planning...
I meant to say 3/16". Sorry, I am coming down with the flu or something so the ole brain isn't functioning at 100%. I will take some more pics...
Separate names with a comma.
The Jalopy Journal
