The Jalopy Journal
Hi guys I have a chance of picking up a ford 226. I was wondering what it is worth. I don't want to pay too much for it.
I have an old Chevy straight 6 dual exhaust manifold. I know these are a bit rare. It has a problem. One of the bolt holes was broken and someone...
I have an old Chevy straight 6 dual exhaust. I know these are a bit rare. It has a problem. One of the bolt holes was broken and someone welded a...
Mine has all the Warford data embossed on it with a patented date of June 1 1923.
I just picked up a Warford underdrive transmission. Weird thing about it is it was attached to a Chevy 4 speed. Did they make them for Chevrolet?...
Hi guy's, gots a question. I was wondering what the front brake drum should before its been turned to many times? Mine is 14 1/32".
Thanks for letting me know. I was not able to pay for the motor and had to leave it at the scrap yard.
I measured the stroke. It is 3.75".
It is in Payette Idaho. I did pull the heads off to see what it looked like inside. No rust at all. I then then engaged the transmission and I was...
The heads are marked 8CM and are 24 bolt.
It has 20" 5 lug wheels. Not sure what you mean by jailbait or F series.
What is the stroke measure at? I pulled the heads just to see what it looked like in the cylinders. No rust, very little if any wear. I was able...
That's the problem with being way out here. Not a lot of guys in the area interested in things like this when I find them.
The drive train is the only thing left of the MH. Looks like a 1 ton. Had duals in the back at one time. The diff in the front has small bearing...
If there is someone in the Boise Idaho area I would tell them. 500 pound block would cost $250 from the scrap yard. Not in my price range.
The heads are marked "Mercury". I will look to see if there is 8CM or EAC today.
Hi guys, Gots a question. I have a chance to save parts off a Mercury flat head V-8. Is anything worth saving on it? It is current sitting above a...
No longer for sale on this site.
Could the clutch be frozen to the transmissions drive shaft? If so probably needs lots of WD-40, time and some heat.
Hello, I just picked up this conglomeration of 4 vintage trucks. It has parts from Chevrolet, Dodge Brothers, Erskine, and Kelly. Radiator is a...
Ok, thank you. I have not used this site that much over the years.
I am looking for a front clip to a 57 Ford F-100. I was wondering what kind of money I looking at to pay for it when I do find it?
Hello, I was wondering if anyone knows anything about a Stromberg MD 721476. I saved it from the scrap yard but I cannot find anything about an...
That looks like the blower, which I went ahead and pulled. Mine has a air breather intake bolted in place of the GM logo plate shown it the picture.
Sorry it took so long to get back to you guys. Scrap yard got snowed in right after I started this thread. The Clark 5 speed was not an OD so I...
Thanks for the input. Yes, I know this is a race forum, but a lot of you know a lot about this motor, I don't. Also I live near Boise Idaho. The...
Hello everyone. I am new to this site. One of my hobbies is saving collectible car and truck parts from a recycling yard. This is not a salvage...
Separate names with a comma.
The Jalopy Journal