The Jalopy Journal
Always leave the adjustment loose on new break in. Always use molly lube on the cam and lifters with break in additive can't be too careful Just...
I'm running a 3:25 gear 31.5 tire 5 speed .86 overdrive With a warmed over flat original motor 29 roadster 60 mph is right around maybe 2200...
[IMG] Sent from my iPhone using Tapatalk
Not a very good pic but it might help[IMG] Sent from my iPhone using Tapatalk
It is stuck in the grove where the original canister would seal on a square cut o ring is Sent from my iPhone using Tapatalk
Drain the coolant out, remove thermostat, fill with water, warm it up and drain again, pick up I believe it's Moroso brand ceramic seal have...
Check with Dave at vintage metalworks he is in Ohio Sent from my iPhone using Tapatalk
Maybe another R valve to the front also, anyway that's what i have on mine, i struggled with mine and kept trying to get all the air out of the...
I used a on off on switch mounted on the steering column just under the timing lever pivot using a one inch piece of copper brake line to slip...
i understand what the manufacture is saying but i don't always follow directions very good, I go with what I know always works for me! it's your...
make sure to let them soak in oil overnight before installing them also clean the roller side out with brake clean or something equal before...
Talk with the guys at Speedway auto parts They have info in there web site Sent from my iPhone using Tapatalk
Call this guy 2317205939 He’s in Michigan I know he just picked up a nice set of doors if he hasn’t sold them yet Never hurts to call He’s a good...
Take the carb back apart and with carb cleaner and air pressure make sure every orifice is clear kind of sounds like the accelerator pump cam is...
Make sure when putting the longer bolt in to hold the rod inplace to only put it finger tight Sent from my iPhone using Tapatalk
You could probably tee in a NO switch Not a bad idea, experiment with it Sent from my iPhone using Tapatalk
Vacuum leak Sent from my iPhone using Tapatalk
Great looking ride! Keep the faith! And look to the Heavens and, thank the one who who supplied the life & wisdom & ability to do what we all...
Does it go away when bringing the rpm's up? Sent from my iPhone using Tapatalk
Ball valve works for me Have not had a problem with it yet Sent from my iPhone using Tapatalk
My thoughts are go for it and see what happens I think u are on the right track Sent from my iPhone using Tapatalk
Thank you Moose That pretty much is it now I just need to get it done Will send a pic when completed Hopefully by the end of summer Sent from...
Ok now eliminate the white walls please Chrome beauty rings and black walls please Tinkirk/Terry Sent from my iPhone using The H.A.M.B. mobile app
Moose how about all one color sorry forgot to mention that earlier Sent from my iPhone using The H.A.M.B. mobile app
Moose A while back you did this for me I finally have a color and if u could again splash this car with how it is going to look i HOPE Color is...
I try not to think or over think things such as this I'm more of a trail and error type of person Sent from my iPhone using Tapatalk
I would think that a 12 volt light running on 6 volts is enough of a resistor you won't need to worry about it Sent from my iPhone using Tapatalk
I've experimented with them and the ones I've tried seem to work fine as is I'm planning on using them on my 29 with positive ground Sent from...
Elliott If you have two excel pumps you need two pump cams The carb is a 4150 right? Sent from my iPhone using The H.A.M.B. mobile app
Separate names with a comma.
The Jalopy Journal
