The Jalopy Journal
3m headliner spray works great. Adjustable spray pattern. Green can. I used windlace to hold the fabric in place to let the glue set up along with...
Excellent job sir. Jealous of your ifs set up. I am stuck with a volare front end in my for the time being. What wheel options are you considering?
Here is a link for some aluminum shoes powder coating is relatively cheap as well. Price seems too good to be true!...
Has anyone been able to find a reputable source for wheels 16 plus size? There are very few vendors which offer smoothies over this size. Has...
Hey Guys, I had some trouble finding a reputable shop to narrow my ford 8.8 within reasonable driving distance in New England. Just wanted to let...
Any insight to changing out the spline receiver in a wheel? I have personally never cut into a wheel before. I imagine that there is a metal...
Just wanted to give a thanks to Baumann controls at http://www.becontrols.com Excellent shop to deal with. I ordered my controller for my e40d...
Any of you guys that have used the fatman drop spindles on a volare. What upper and lower ball joints did you guys use? I ordered a replacement...
I am in the same boat as well. My buddy Pat has his AC tech certifications and he gave me a long winded explanation about "system capacity". I am...
I have been looking for quite sometime now and all i can find is cable x as mentioned above :( $325...
Quick question on the steering column that you chose. What did you mean by "cut to fit"?
http://www.optishift.com/downloads/E4ODmanual.pdf Tps needed.... Any recommendations for a TPS sensor? (This is a headache i've had with my R1)
I was going to use cable X to remedy my speedometer sensor issue. As far as a qiring harness i was gonna go with the compushift + the wiring...
I finally got the machine back. The AC circuit was not working correctly. When you open the box on the machine there are two prongs which point...
i got it out of a 1993 lighting and i am utilizing the 351w from the same truck. Shifted fine when i purchased it. Just wondering if anyone out...
Did you end up getting a controller for your tranny or swap to another type? I am putting a e40d in my f-100 wondering if you used compushift...
Do you still have the X brace?
I am doing a 56 build as well. Havent gotten around to posting pictures up. I have cherry fenders and a rebuilt y block if you want them. I've...
Found it in this thread GM fuel sending questions thanks guys!
Have you guys been able to source an aftermarket 0- 30ohms sender?
I am no proficient TIG welder by trade nor do i claim to be. I started this thread because i was encountering problems with my machine (which has...
Thanks for the tip for the reference guide that seems like a sweet little doodad
The machine was in AC but the electrode ( torch) was hooked up electrode negative....
@ Gary- Thanks for the suggestion i'm definitely going to pick one up. @TIG- The machine i have is an inverter. I was welding with DCEN. I have...
book offer some base settings for various metals?
radnor* here's the link http://www.airgas.com/browse/productDetail.aspx?Category=6&product=rad64001958
Yes you are right my mistake but i have some orange which reads 2% ceriated on the package put out by a company called randor.
I can adjust the ac frequency of my machine which would mean that it is an inverter right? I was using the green ( Yes you were right TIG my...
Got some beads laid nothing to pretty. Pulse function is not working on this machine. Or at least not well... Have you guys had a similar problem...
I have a 220 amp machine. The aluminum is 3003. Last night i managed to get one bead down before my argon ran out! I was using the wrong...
Separate names with a comma.
The Jalopy Journal
