The Jalopy Journal
The ECI unit, that is a hydraulic booster, is a great idea. But, it is very ugly, for lack of a better term. Wonder if could be adapted to...
Hey, thanks for the help on this. 2 1/2" buick shoes are very hard to come by. I have a bunch of old ones and looked into relining. Very...
Weren't the Corvettes disc drum? All I have found so far in drum drum, is is 15/16" in a power m/c that takes the short rod. Or one that the...
Not a heavy car, probably 2700 lbs, a '32 3-window. I just took off the ugly chevy disc set up in the front that worked really well. I put on 2...
I wonder if this could be hooked to another M/C for a drum drum situation? I'm sure that the one they have is for a disc drum. I have used their...
Tanner and Sam, like the car! Kinda reminds me of Dave and I pickin up my '34 5-windo in Sacremento in '76 and driving it back to WA. There were...
Vergil, been looking at your throw out bearing setup, looks like a great idea. I have an early block with truck bellhousing, hooking to a top...
Did you ever get things straightened out with SOCAL? I would like to buy one of their axles also, but don't need any more problems than I already...
Bill, I would like 2 sets. Can you give me your phone number? Bob
James, saw your Feb. post about front suspension swap, wondered what you had figured out. I recently picked up a stocker that I want to make into...
I read on another thread about carbs about a small ball under the accelerator pump in the rochester 2gc carb. W/O it, the pump would not work...
BBYBMR, I have the exact same problem. Check out the "discreet pcv" thread. Lots of ideas and theorys.
I've seen the new 97's, too. They are nice and are not SUPPOSE to leak. But, I heard that nobody has them in stock to sell. Anybody know any...
What I'm going to attempt to do is use a 3/8" hard line from the bottom of the oil fill tube to the air cleaner. That will be difficult enough,...
Fullblast, I was thinking the same thing about the 5/16 being too small. The reason I used it, beside having it handy at the time, Is the carb...
My pcv valve is in the alum. cylinder which is plumbed to the rear of the manifold into a baffled tube underneath. It is connected to the center...
But I have a baffled pcv in the rear of the intake manifold by the dizzy. that should take the place of the road draft tube and because of the...
What is wrong with this set up? I have a pcv connected to the crankcasw or valley, it is connected to the center carb, there is an air return...
On my situation, maybe I should try the hose or line from the oil fill tube to the bottom of the air cleaner for the return. Then, seal the oil...
I have the pcv plumbed into a baffle underneath the intake filled with copper chore boy. It is connected to the rear of the center carb. The...
anybody done this? Got this older restoration (70's) '32 4-dr. and a fresh 8BA, want to install with out taking the body off the frame. Do not...
Well, actually I not new to reading HAMB, but new to posting anything. I end up here by searches on google all the time. It has been helpful many...
I heard of someone in the mid west or SE pat of the country that is set up to drop an original '32 ford head light bar. He charges 75.00 +...
Separate names with a comma.
The Jalopy Journal