The Jalopy Journal
look up on ebay they cost 30-60 dollars adjustable reamer. measure your kingpin and purchase accordingly [IMG]
Look up adjustable reamer on ebay they cost 30-60 dollars [IMG] measure king pins for size
Maybe this will help[ATTACH][ATTACH]
Is the dust cover on between the bell housing and the engine block? it adds about 1/16 inch of space, also loosen and retighten the starter if...
Very Impressive, great photos, way above my paygrade! Thank you for the details
[IMG] [ATTACH]
you might check with VanPelt Sales LLC send the a photo of your trans and see if! Ford Top Loader Three Speed Transmission Options...
like the way your mind works, great job!
The gray box below the on off switch has a set of contacts, that are probably stuck closed, clean the contacts and sand them smooth. Thats why the...
Binks model 18 i've used over 40 years and still using. the hvlp guns work ten times better but the I'm too old to change! Remember you get what...
Pretty cool, are you considering reversing the trunk lid hinges to give a full box for the trailer? Thats a great idea, look forward to seeing the...
I remember those ! [ATTACH] [ATTACH]
Ford 9n 1936 still going strong and working hard. [ATTACH]
on 1949 ford trucks we used to wire a n/o switch to the clutch pedal so the starter button would not work without the clutch being engaged. Guess...
Me and my dad, different wars [ATTACH] [ATTACH] [ATTACH]
also you should disassemble the motor check the windings remove the rust and seal up any bad insulation to keep rom shorting.
[IMG] Perfect Aire ProAire 540-648 MFD Round Start Capacitor Sold by: HVAC Pros Return window closed on Oct 22, 2020 $7.48 look up this cap on...
powdered Tide laundry soap to clean (takes all the buildup off the aluminum) , then polish with semichrome and a buff wheel, and finally gloss...
My problem was that I liked the work more than the build and would get sucked into other builds, fixes than I had time for and my projects sat on...
interesting where the driver is sitting almost like a rail with a body set
I like it!
The good old days, friday night cruise in's Riverside Ca. Still there , once a month friday some good looking cars, [ATTACH] [ATTACH] [ATTACH]...
steel wool or a light coat of lacquer thinner on a rag just light amought and wipe dry will dull the shine
dead blow hammer , squirt some oil in the cylinders, plugs back in and spin the engine via starter, should work. Pirates right on.
bearing/race press.
Did you replace the rubber u channel in the metal frame when sealing the glass? if the channel is not there the glass would seat too far in the...
Just makes it more special then, glad you found one!
[IMG]
Dual Shaft blower motor,3 Speed,4 Wire, Body 3" DIA x 3" L (3.5 with bearing cap), 5/16 X 2 7/8 Shaft, 12 Volt. many applications. try acme air...
Thanks for the memories! I had forgotten about the spring spacers we would put in the front springs to give the dragster look and then come in...
Separate names with a comma.
The Jalopy Journal
