The Jalopy Journal
I've asked two TC companies and neither have replied yet (3 days ago). Thought I would give it a shot here.
I'm putting an AOD transmission behind the 8ba engine in my 39 pickup. What stall speed TC would work best with 3:78 rear end and 276 cu in 8ba...
Ronnieroadster, I miss spoke not bolts on the TC, but the studs on TC. There are two early 70's starters one with short gear, and one with longer...
Flathead Dave, I purchased the 91628901 kit w/o transmission. I had already sourced a 1987 AOD with its TC. I had mated the TC to the transmission...
Speedway was my first call and they referred me to Performance Automotive, neither had an answer. PA suggested I purchase a new TC and compare to...
Two years ago I purchased the Speedway adapter kit to mate AOD transmission to 8ba mercury flathead block. My crankshaft is 49 mercury 4" stroke....
I've done it both ways pack the oil pump gears with petroleum jelly and get oil pressure quickly. I just purchased an old fire extinguisher and...
chev34ute, Here is a picture of my 27 TT, looks like someone along the way converted from full cab to C cab. Not sure about that I'm very non...
Chev34ute, I have a 27 TT under the side shed with a C cab if you still need measurements. It does not have any doors on it.
It has been too long since I took the ole girl apart and I don't remember which hole the radiator bolts into. Is it the hole closest to the motor,...
There was a post on here a while back where a guy used Dodge Caravan wheels center, I believe they were stamped Dodge 537. His looked really cool...
Had my Father's Day meal last night, prime rib. Working on irrigation, mowing, and spraying for weeds today so I can devote tomorrow to working on...
Good looking truck!
Looking for measurements to make my own wood blocks for the front and back bed. These are the blocks that go on top of the frame and under the...
I cut just a little off the X frame to fit the AOD and the U tube videos says if the shifter lever is pointed up the TV cable lever must point...
I was thinking more of shifter that mounts on top of the AOD like the one in the link below....
There are different type shifters for the AOD, cable or rod I don't have either and will need to purchase one.
I'm putting a AOD transmission behind the 8ba flathead in my 1939 Ford Pickup build and want to know what shifter would work the best. I'm looking...
On road trip today and to my surprise found these vehicles. Don't know anything about them or who owns them. Located across street from SunSouth,...
Finished restoration on the 1942 Ford WWII jeep, next in line after finishing the 39 Ford Pickup.
Blackjack that is outrageous motor for the frame, but cool. Any pictures, or how to on Model A engine and T5 trans?
Looking for ideals on what I can make fit into 1927 Model TT. The original engine block and head is split wide open. Would like to keep it simple...
BTT
I had some time this weekend due to the rain outside and was going to work on the backing plates and wanted to get the parts so I could check my...
I had researched converting my 1939 Ford Pickup front brakes from Lockheed to bendix and saved the technical thread from couple years back....
New here, I'm planning on putting a Rochester 2 gc carb on my flathead 276 cu. in. build mated to AOD transmission. Can someone walk me through...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Truck is a one ton with solid frame...
Still available, I was out of the 21st Century for while due to Hurricane Michael.
I have a 1926-27 model TT one ton truck with C cab. Back fenders and running boards are not pictured, but are with truck. Also comes with...
btt
Separate names with a comma.
The Jalopy Journal
