The Jalopy Journal
I couldn't agree more my ignorance for those 4 wires and their function is what complicated this more for myself!!! Glad it's over now though and...
Is it a different part number than KJSR provided? That one says it fits a 1974 small block so I hope it'll fit my grommet if not I'll have to get...
R Right but the part that made the difference on my car was the jumper wires on the regulator plug when mine were jumped as shown earlier it made...
Will do thanks again
Okay I'll pick one up right now! Thanks for the reply. What size pcv hole is your valve cover?
Does anyone have the Delco part number for pcv valve on a Goodwrench crate? Gm doesn't list a specific number for the crate pcv. I put a fram on...
For anyone doing this conversion in the future this is the diagram that let me use the stock harness with very little modification and everything...
C
B
A
Number one terminal has 12.4 volts key off Number one terminal has 12.4 volts key off and with the plug unhooked from alternator. What did I do...
Okay thanks Mark I'm checking it now
Just when I think evreveryth is golden I go out to start the car and it's dead... I start hunting around looking for shorts and the alternator is...
It's all going into some conduit as well as the harness...and I will open the white wire back up... I did get a good bit of soder on the wire....
Thanks and thanks for everyone's input on this it was a success and it's now charging 14.1 volts!
Okay so I have everything hooked up grounds are sanded the plug is installed on the alternator and the number 2 terminal is jumped to the 12v feed...
Thanks for the info on that I'll make sure that I clean every connection while I'm hooking it back up..Haha hey Mark! Thanks for the tip I'll...
That's an extremely good point... So I've got another 10si alternator its a new Wilson unit 63 amps for a 1975ish chevy. I got the plug also to...
If I "start fresh" can I just get rid of every old wire that has to do with the external regulator and just run an inline fused wire to the...
Okay I ordered a plug it'll be here tomorrow and I'll be ready to restart from the beginning to get this correct... The alternator is putting out...
The black and blue wires go to the dash battery indicator and to the ignition switch according to my shop manual and it was externally regulated...
The current setup
Hey guys! I've been running the roads all things peachy put 1000 miles on the small block since last I posted thanks to everyone who helped out...
Tastes better lol awesome I'll keep the delcos in there for the time being thanks everyone for the help!
Hey squirrel thanks for the info I'll keep what I have in there then I had no idea they haven't used washers on those for that long and after what...
Hello all I read an article last night about spark plugs and it has my short winded mind thinking.... What do y'all run in your 350/ sbc engines?...
Okay that's good to know and in Odessa there is a nice old car junk yard I'll pick a used one up at thanks for the tip and the car is a 65'...
Thanks for the photos it looks like one could be installed on my assembly fairly easy
Thank you and thanks claymart I'll look under the hood and see if I can't find it I have a loose hanging plug that went into the st300 as it was...
Am I missing it? The switch isn't where I thought it was
Separate names with a comma.
The Jalopy Journal
