The Jalopy Journal
Here's one that hasn't been suggested, from the house of sketchy, and I can't afford that fancy stuff, clean the surface area in and around the...
I believe there is a vast amount of knowledge offered on the HAMB. And some real opinion fueling it. And I do respect that, I just happen to...
To quote Stevie Wonder, "when you believe in things you don't understand". One said look at this it must be bad and everyone had to agree...
Finally...for those of us who felt the stones, we salute you. Not necessarily. And as far as it goes, mild steel will have a tensile strength of...
I agree. 100% . It's not popular, but I do.
I used to work at NAIT, and if you haven't figured out what's happening with the programs well, let me explain. Apprenticeship numbers are down...
Well Dan, not to be the Debbie downer here but there's a fine line between the rich and all those poor. Not to say I hold a looking glass to the...
[ATTACH] You got a part bolted in place, it's stationary, no movement, and this isn't the weaker point to worry about? I'm trying to figure you...
I think you guys worry to much. How much to much, that's the question. But to address it, look at the material, ask what does it have to do, what...
While one could argue, "I could do better". Or "that was a dumb thing to do". I'd going to say the car made it from here to there...really, how...
I'm going to offer my two cents to the fender question. Fix em. It looks like you have the stuff to do it, and it can be done, so don't do a me,...
Isn't that something? 54 looked and no reply? I'm going to say no. 50% chance I'm right.
With nosy curiosity, what's the value of the business that has you asking, is it a legit business? Sounds like big money stuff? Maybe a deal too...
You might think it was a lot of work, but the truth is it wasn't. It was plain carbon tube, the welds were all ground. Sure, I ground the tops...
It doesn't have to break the budget or the bank if you do it at home, but it does take some time and effort just the same. [ATTACH] [ATTACH]...
Seems to me the question about the snugness of fit into the hole isn't as important as how good the weld will be at holding it there...?
From the guy who knows nothing, when it comes to most things, it's depends on the how and what, how you build them and what kind of abuse they'll...
While i've yet to buy one, there have been times I wished I did own a heat gun. But yeah it could work as well and maybe be even better. Lead...
I'm going to comment on the torch used and would suggest there were better options out there. Better as in offering a softer, cooler, less...
Somewhat, but not enough would be my guess. I'd replace the mufflers. Megaflow? Like who drives that fast to justify the noise? I'm a fan of...
I'm sure there are smarter people than me reading this, and I'm looking forward to what they have to say. Until that time however, I got two cents...
I'd take it apart, find an open space, draw some reference lines, laid flat with some fitted dowling protruding compare notes on any deviations....
I was going to offer some considerations to the conversation. Stuff they don't mention or talk about. In no particular order. If you're going to...
Two hundred and thirty six. That number rings a bell as to how many holes were plug welded and eventually ground flush on the board set that...
I'm not sure what you guys are thinking, but let's talk about what's the dilution of the acid? Start there then ask, what will it dissolve and...
If I was going to use an aftermarket part, I would expect to do so. Stock parts, I'm not so sure it's necessary? Once again I have to ask, who...
What's not to like? It's clean, functional and affords a degree of creativity which you did display, I give it a yes vote. [ATTACH] If a guy...
Knowing that it is impossible to say that what you did to remove relocate and reinstall the distributor was accurate in its placement, or for that...
That right there is proof to me. As for filling, most hubs that I've see have small chambers, I don't see a need for lots of fluid anyways. you...
So...I guess this means you're an over thinker? Sorry, it's no... I don't think it, the glass, is going to "bend". Glass isn't ductile, it's...
Separate names with a comma.
The Jalopy Journal
