The Jalopy Journal
Wray schelin videos on YouTube taught me a lot about working out dents/ripples including how to use a shrinking disc.
I’d buy one.
This could be a stupid question but how were the speeds changed from high to low? Was it a switch on the motor? I see no way of doing it on the...
It was a craigslist find. The guy didn't have the capability to test it but for $75 I figured I could take the risk. The best part is that it's a...
I just got a new motor installed. Had to travel 3 hours one way to get it but for $75 I didn’t want to pass it up. It’s a 3 phase, 3hp dual...
Thanks for all the info guys. I guess I will start looking for a new motor. With a new motor and vfd, can I bypass the switch box? Are the...
I’m using a vfd on my mill which was pretty easy to setup. I just don’t know what’s involved with a step up transformer. Or can I switch to a...
I just bought a Pullmax p5/2 and I’m going to need some help getting it to run. It’s a 3 phase, 420v motor that is not dual voltage I believe. I’m...
I found this series very helpful when building headers [MEDIA]
You were correct. I did exactly as you suggested and the pattern is alot better. The H4 bulbs are held in with 3 screws so I had to reclock the...
I was driving my mercury last night for the first time when it’s been dark. I just recently redid the headlight wiring so the headlights are...
bttt
remember, the only ones that haven't had an accident like this, are the ones that have never done anything before....
you would be correct
I would say the cracks are due to when the door was hit. Seems like the safe bet is to cut out the cracked area and replace.
On my 1939 ford pickup I am fixing the bottom of the inner door where the drain holes are. The door appeared to be hit at some point which caused...
Awesome! That helps a lot! Thank you
thanks for checking. If possible could u measure the length, width and depth of the recesses? I would greatly appreciate it.
I can see on my doors the start of the recess where it was cut so I’m thinking it was there.
oh really? So is your panel just flat in that area?
I am starting to repair the damage the p/o did to the inner structures of both doors. Looks like they took a plasma cutter to it? I need to make...
Bttt
Ttt
For sale is 1939 Ford banjo rearend from a pickup. Includes everything pictured (rearend, torque tube, and driveshaft). I have never had it apart.
thank you for the response. How did the regulator arm attach to the bracket that bolts to the frame with the 10-32 screws. In my pic I have a...
I have a quick question for you guys. I’m about to test fit my windshield frame into my 1939 Ford pickup and I’m not sure how the lower bracket...
Separate names with a comma.
The Jalopy Journal