The Jalopy Journal
I got 2 hoses going to the heater box, they don't even get warm , if there is no shut off for the flow I guess she pluged up
needs lube?
How does the flat head with 2 water pumps get water to the cab heater ? Does it get pushed by one of the pumps or is it just a slow gravity feed,...
What year C4 ?
What year c4
What automatic tranny are you guy s putin behind your 48 flathead truck
Steel cast
HEADS ?
TAG ON BLOCK and the heads also[ATTACH][ATTACH][ATTACH] [ATTACH]
in other words disconnect the stone firewall mounted ballast resistor and join the wires together correct \/\
Whats the right coil for the 48 flatty ,12 volt, solid core wires, duel points, crab 48 Merc truck or f1 maybe a number and ohm thanks
Is the steering column on a f1 the same as f2 - f5 etc, The 48 has a f1 drag link is 2 different sizes , on one side takes a small ball and a...
These stromberge-Fire 2 Bolt Distributor tec ANY GOOD CANT FIND ANY REVEWS[ATTACH]
Does somebody make a modern filter that you can use inside the oil bath filter original for the 48 ford 8 flathead ?
Ok so an inline pump is what I got , where is the best place to mount it ? I got a large filter at the tank and one before fuel pump,
this round rattle can top whats it for
when instalin a new drive on starter do you dip it in oil first ? how do you keep the thing lubed, there is a 1 1/2 cap on the bell housing ,the...
so this would do the trick??? https://www.vintageautogarage.com/Airtex-Electric-Fuel-Pump-12V-Carburetor-Engines-p/ae8016f.htm
part numbers anyone, fuel pump ,bypass
48 Merc truck flathead Ive read a hundred posts on this , why can we just put in a vapor canaster of some kind or a return line back to the...
obviously I need to change my address in my profile , that way I wont get so many comedians on here ,thanks
Im doing the PerTronix Ignition thing on my 48 ford flathead 8 ,so I might as well do everything else, what is the best way to dismantle this...
Nothin but dumbassory
Everybodys a comedian around here
48 merc 1/2 ton flathead 8 whats involved in getting rid of the points, she is already 12 volts with alt.
Took large panel off oil pan, ya about an inch thick, I can get most out of there but is there a trick to drop the pick up screen to clean it
ok I will move again put load on wheels and try again
so this meens that the rear diff hast to be 2 deg up
almost got this 48 truck ready to roll, thanks for all help. Now to set pinion angle this is what I have tranny down 2 deg shaft at 5 down...
ok guys thanks , I found where they go, I don't know what the last owner did the wheels hit the springs, this thread closed till my next problem...
Separate names with a comma.
The Jalopy Journal
