The Jalopy Journal
If the '40 is like my '38 many of the holes in the firewall were for the mounting clips holding the insulating pad that was on the interior side.
I looked around on the web and found a post that stated that the Bell & Ross Bellytanker was not a real car.
I mounted a couple of lights under the dash. Their close to the existing wiring and give me plenty of light. (What I need to do now is add a...
I use denatured alcohol to remove Dykem.
Can you take a photo looking back at the clutch fork
Is the fork in the correct orientation and is it clocked correctly on the clutch shaft?
Those look great. FYI: They are called a Clam Shell Vent (Ventilator). They are available in stainless or chromed brass and come in several...
Don't know about the girl thing... My wife taught me how to drive a stick well before we were married and for many years we had 3 pedals in our...
How about H & H Flatheads in La Crescenta.
FWIW the guys on the Ford Barn swear by Skip Haney.
FYI: I used PC-7 on my truck's steering wheel and it looked great.......that is until it sat during a Minnesota winter in a unheated garage. All...
I've been using Pennzoil Synchromesh in a '85 T5 for years without any issue but I don't know how your transmission compares. PRODUCT DESCRIPTION...
Cheap plastic boot trays from Menards. 14" X 28" $2.99...
[ATTACH] Here is mine. Nothing special really but I polished the Stromberg carbs and added a few bits of shiny stuff. I have since swapped out the...
Worked for me on Chrome. Looks like they have been having some issue. "We are having issues with the Swap Meet ad link, please email your swap...
I was not aware of Canadian Hot Rods so I sent them an email asking if they had a online issue to check out. I immediately received a response...
Yup, that's what I'm running.
Wheelsmith....good people!
Hood prop: [ATTACH]
I don't forget that I purchased something its more that I forget where I put them.
Check out Wheel Smith for new wheels. I have them on my truck. Great people. https://thewheelsmith.net/
Are we talking about new true English 97's or the copies? If they are the English 97's you should contact Clive at Stromberg and I bet he will...
I'm running a 59A with the two piece oil pan and its the only way to go. It saved me from pulling the engine several times.
I run Pennzoil Synchromesh in my None WC T5: Pennzoil® Synchromesh fluid is a manual transmission fluid designed for certain manual trans axles...
de-natured alcohol and then some clean Dot 3 brake fluid
Do yourself a favor and beg, borrow, or steal a pressure pot like the Motive shown above. I have a Motive and it makes bleeding brakes a simple...
So which one do you drive to the BTT50's?
The title!
I purchased the open drive kit along with the torque arm kit from HRW when I did my '38 truck years ago. I ended up not use the torque arm...
2nd this. Lots of truck guys over at the Barn.
Separate names with a comma.
The Jalopy Journal
