The Jalopy Journal
ive yet to find one that will clamp to a 97 with the barrel style top. everything i find is ment to clamp to the tapered top style
i like the factory ford on there. very much what im lookin for. would you be able to show me how it clamps to the carb
i like that . need to find a base that will fit the 97 first
Soooo whats out there that will fit my stomburg 97 for a REAL aircleaner? i can use a tiny show one, im on lotsa gravel and dirt. the lil ones...
late 60s ford econoline van seats. need to trim down the original mounts but they look the part [img] [img] [img]
well a bit more fabing and building. built the braceing for the B pillers to strengthen them up. more cut cut cut bending. turned out good...
not much done this last few days. wireing strung for tail lights. divider panel finished. built a vent line for the fuel tank. few small...
today was final fit up on trunk lid and add a handle. havent figured out a latch yet. it looks prity good compared to what it looked like to...
yes im going to bend some 2-1/2" tubeing i think to go around the top and weld it in. the top of the 1/4s were not cut uniformly so there will...
trunk lid hinges on today and hole drilled for prop rod . some might not like the barn door hinges but i think they fit the job prity good [IMG]...
well a bit more got done today. havent had to much time to work on things. some gauges in , ignition and starter button all wired in and...
this is the second time ive used the idea.
not sure if this is the right place to ask but here goes. what steering box and colume fits the A 30-31 frame and cowl the best? i have avalable...
fueltank box built and inplace. used a 12 -15 gallon boat tank. started building the header to separate the trunk area from passenger section....
found time for a bit more work today. built a brace to go under the cross piece thay the trunk lid runs into. no press so did it the old...
Yes i see those to. Gona look for a set
my contribution [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]
i wanted something old, but not something everyone has or does. not sure if i hit the mark or not. they were not easy to find, and i have had...
took me a long long time to get this far. these poor 1/4s been bent and twisted every which way x 10. wow it was a fight. still far from...
well shes gona be prity ratty allready. who has any good wierd ideas for tail lights? ive got a ton of stuff to choose from leaning towards a...
blew it apart yesterday and spent the whole afternoon welding up cracks and holes and tweeking. 1/4s back on for good. tomorow fit up the back...
feels good got most of the welding on the rear quarters done today. drivers side one back on tomorow i hope to have pass side on, and fit up...
well wow time flies havent had time to finish this thing, until now. found a decent set of sportcoup 1/4s. everything prity much welded up,...
hard to know what to do with it [img]
im sorry guys, i should have given more info. this is in a 51 mercury M6 truck. truck was my grandfathers. 20,000 original miles. the truck has...
1CM on heads havent dug any more into it 51 M6 truck 255 4" crank? [img] [img]
i did find time to build an ultra traditional header out of an A driveshaft tube, put a stromburg and burns downdraft on my other speedster....
unfortunatly ive been to bussy with other things this winter but come spring it will get finished. the rear quarters are in the shop getting...
prity decent roadster cowl needs lower patch panels other than that prity good shape for 90 year or ford parts [img] [img] [img] [img]
found time to get at it a bit more yesterday haying season here bussy bussy. i built a small cage to hold the B pillars square and where they...
Separate names with a comma.
The Jalopy Journal
