The Jalopy Journal
This '53 Plymouth Suburban is going to be my next project...[IMG]
[IMG] 1973 AND LATER See Figure 13 On these models the T.V. cable controls line pressure, shift points, shift feel, part throttle downshifts and...
Cutting the pipes off at an angle like a slash tip might help...
I use rattle can etch primer and semi or gloss Krylon quite often for under-car parts & chassis touch ups... Eastwood also makes a nice spray...
Yes, and wear safety glasses or goggles!
Three more batteries and five more blades than you think... I'd get a Gas Power Chop Saw...
Can't be a Model A! It's a '50 Chrysler you must be thinking about...
[IMG]
Simple bolt on parts if yours is in good shape to start out with will make a world of difference... A High Compression Head, Single 2bbl Intake...
You could mount a small hyd pump to the motor and use a hyd motor to drive the compressor (like a Twin Cessna) but you'll still need a modern...
X2 About 25 years ago there was an old timer that had heard me pull up to his shop in my '38 Chevy Coupe with a 216 and the first thing he said to...
It's 18 miles beyond your bladder limit, low taxes, & dirt roads!
I think it's a great idea! I might try this... Start with laminating resin mixed to go off slow and lay it over your cardboard with one layer...
Aeroquip AQP hose & fittings from Summit are one day to you from Reno, NV...
You could use Aeroquip or Equivalent... The Hose Shop in Santa Cruz is a good place to start 121 Ingalls Street Santa Cruz, CA 95060 <table...
See you there!!!
X2 Look for 3M Super Black Weatherstrip and Gasket Adhesive P/N 08008
Pretty typical 727/904 complaint... If you run it in neutral for a minute or two (longer in cold weather) before dropping it into gear it should...
WTF, it's really in their system... I'm going to send this in to our local store and see what happens Monday!!! [IMG]
Works on the Dodge Dart as well...
Sorry to hear of your loss... Dave
Synthetic 5W-30 or 10W-30 depending on OAT, although I did have some problems with MAF contamination. Switched back to Mineral and no more...
Great idea and looks good too!
evening bump...
I noticed there are a few open nights for a group to run together Wed night in Lane 7 at Sacramento Raceway Park......
If it's stock like you're saying, I'd go with the 340/360-3 4BBL Hyd Cam 430/444 268/276 Sealed Power CS644 is one choice Inexpensive and works...
Pickart's on Boulder Hwy in Henderson... Just south of Sunset
Use Form REG 227 http://www.dmv.ca.gov/forms/reg/reg227.pdf Check the Box "Transfer of Title with Duplicate or Paperless Title" and follow the...
Cool! Have you posted any pictures from the way it was originally?
Separate names with a comma.
The Jalopy Journal
