The Jalopy Journal
Just FYI. These are the correct cylinders: [ATTACH]
:D
[IMG] There you go, by way of retribution for the '71 model photo. Here's my '38 instead :)
No problem, thank you for the explanation. I knew I'd seen later stuff on here but I now see there is an "Off Topic" section so was probably...
This may well confuse you further. If it has indeed been narrowed then the width will have been to suit the A-Body Mopar it's sitting under (photo...
I didn't know how! I did try to no avail so assumed it was for the casting prior to the bore being machined.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Finally got some info: Drums are 10" Shoes 2.5" wide Brake cylinder casting number 29608 Axle width to wheel mounting faces 57.25"
It's under the back of my Dart.
Limited Slip Differential. Good info thanks
Sadly the axle is now stripped ready for the new diff
Good info thanks, even early ones? P.C.D. is Pitch Circle Diameter, often referred to as a 'bolt circle' or bolt pattern yes.
I hope not, got a new 9" LSD on the way!
The new larger cylinders are indeed 1" bore. The cylinders from my axle measure 23.8mm bore o_O
Sorry the cars currently miles away so can't get a photo. PCD is 4 1/2". No tag.
Hello all, hope i've posted in the correct section. I need to replace the wheel cylinders in my 9" Ford rear. The trouble is, I don't know what...
Corrected!
Makes sense, If the primaries on both the Holley & the Eddy are the same. Of course, when (or if) the secondaries open I imagine the Holley might...
The thing is, being in Britain I'm a little bit limited when obtaining the carbs you've suggested. That's why I boiled the choices down to those...
Gimpyshotrods - The linkage is intact, I was just musing that the engine may not have been flowing enough air to make the secondaries open even at...
What did you replace?
Thanks, would you happen to know the size of the Edelbrock 500 primaries compared to those of a Holley 390? The secondaries on mine may have never...
Hi folks. I have a Flathead Ford with an Edelbrock 500 4BBL. It was running okay, but I'm aware that the vast majority of people will say it's too...
Thanks everyone. You may find this photo amusing of my wife and I 1/8th-mile drag racing, she in her '56 Austin A30 (yes, it really is tiny) and...
Hello, I'm British, but hopefully you won't hold that against me... I have a '38 Ford Coupe, a '47 Caddy, and a '57 Lincoln Premier I also work...
If you go for a H78x15 you'll have the same width, but a slightly smaller diameter, then I'd use a G78x15 on the front, A G78 is 27.7" in...
Separate names with a comma.
The Jalopy Journal