The Jalopy Journal
don’t want to argue, but as stated in my original post and along with the pic.. it’s a spring from Millworks that is built to 26/27 T specs with...
haha no worries! I’m definitely going to test it with just the spring first before pulling the trigger on a step. This is the spring. Still...
I think theres a misunderstanding, the front tires are 26", the rears I am using are 29.58" tall (BF Goodrich 820-15's).
THANK YOU! This is just the insight I needed. Did you do the typical Tardel (frame width 4-5" forward of the crossmember) step? or less? This is...
Pics may be helpful! I know my perch width will/should be about 45. Millworks has a claim of 3" of drop for their AV8 spring so that's only .5"...
Thanks Tim, that’s what I thought the consensus might be. At least if it doesn’t drop as much as I need/want the step can be smaller and maybe not...
I've ran through a ton of threads hoping that there would be some nugget of info to answer my question. I'm building a '28 tudor, will be full...
Thanks much! I plan to call Tony soon. I'm glad you pointed out the CR performance as it relates to highway friendly gearing. Definitely a fine...
Thanks for the hot tip! I need to get some guidance and a quote on some other tid bits for the 324 like pistons, lifters, and a timing set, so...
Thanks for responding Greg. I actually had to search out and find all the 1.5:1 rocker parts just because of the cam. Engle catalog specs the cam...
Thanks Fordors! With that known the only piece of info that I would be missing that would have been on the cam card is the duration at .050....
So... I as I am gathering parts and pieces to build the 324 for my '29 tudor, I am looking to get some guidance and input on a few particulars. I...
I know this is dragging up an old thread… but my dad was sending me some pics earlier of photos he took at a show up in Duluth MN, and I’ll be...
Not to kick up an old thread… but there was a lot of talk about Jerry Johnson’s ‘32 delivery and I thought I would add to the photo history of it…...
Wow that really would be a fantastic help as well! and really eliminate guesswork or the possibility that my reference point or alignment of my...
After looking, they are the correct stamped braces, the 30/31's look entirely different 29: [img] 30-31: [img] Thank you! That will definitely...
WOW! Tim I cant thank you enough, that is the most help I have ever gotten on the HAMB! Last night I spent a few hours with a floor jack and some...
Correct. It's mainly the two holes at the frame horns where the two bolts go through the hood shelf and fender in to the radiator apron (looks...
Thanks Tim, the nearest exposed hole would be the radiator mounting holes on either end of the front crossmember. I believe there is one hole...
Hi y'all, I am hoping someone can help me out here. I am hoping to get my 29 Tudor squared up and aligned so I can finish the chop and get the...
Thanks to everyone that chimed in, offered advice, and offered up their own parts. Problem solved over here on my end. Got an AB coded Weiand...
Bump Sent from my iPhone using The H.A.M.B. mobile app
Yup I noted that above. The early variant like that noted in that eBay ad above (O4D) actually carried numbers denoting fitment. [IMG] The later...
I saw that, and was hopeful. Sadly it too would need to be machined. If you blow up the pic it’s stamped “57 58” just below the “O4D”. Those...
Hey Tubman, is it the super open plenum type where it has no exhaust crossover (just a thin blade of aluminum and a pad that covers the exhaust...
I don’t have access to a mill in order to do that. After looking at the runners I think the above comment is true.. there’s not enough meat in the...
Purchased this 59-64 371/394 Offy 2x4 intake hoping it had enough meat to machine down to fit a 324 (it don’t). My loss is your gain. Selling for...
The holes are about 2/3 covered (intake stud/bolt holes are significantly larger in diameter than threaded holes in the heads) [IMG][IMG] Sent...
Some pics may help I suppose. The outer flange appears plenty thick. Idk about the lower area. Hopefully I can get some clarity here....
Ok, so I’ll start by predicating that I’ve poured through threads for the answer already and read through tech to no avail. I have a late 371/394...
Separate names with a comma.
The Jalopy Journal
