The Jalopy Journal
Not that important, just curious
[ATTACH]
Picked up 63-65 m20. Pretty straight forward on the id. However, on the passenger side below the casting number, there is roughly and faintly cast...
My father: treat your friends like flour, sift very carefully to remove all the weevils.
would you happen to have a pic of the dash? I belive you have solved the mystery. Thanks guys.
Lot easier to drill new holes in the shifter arms closer to the pivot. Arms are hard and require high quality bits and lots of lube.
Good thoughts, but they dont have the detail on the side. Thanks the under hood shot sure looks like the firewall on mine. Maybe different model?
Wondering if anyone can ident this cowl. Was in pile of 31? lasalle stuff. Is not lasalle of any year i can find.[ATTACH] [ATTACH]
Been a lot of years ago, but when i did my 60 corvette after days of sanding to do one fender and a door someone wiped big gob of grease on the...
As said before, fingers. scrub radius is actually less than a half inch.
Dam clunky fingers. Anyhow, toe is 1/8. Ackerman is 6" long
Caster at 5, camber currently at 1 but will probably need sdjusted to some less
Prodably do but occasionally i refer to the experts to ease my mind.
Ok, here is what i started with only no so rusty. Pics of the finished and mounted spindle. This is the reason behind all the...
I' ll do that but it wont be till tuesday as i am a technological troglodit. I only have intenet for 3 hours on tues, thurs, and sat. Please dont...
Built a set of spindles to fit my 28 straight axle from a pair of 61 pontiac spindles. To get them to fit the way i wanted, the spindle centerline...
Separate names with a comma.
The Jalopy Journal