The Jalopy Journal
is thata chevy coupe in your avatar? If so and that is what the regulators are for.I have an original set out of my 5w 34 I'll sell for $50...
Vintique does not sell direct, only thru dealers suchas Yogi's, Speedway, Parr, etc. They are a long time aftermarket supplier and make very good...
Actually a good way to fit the ornament to the shell is to use a steel gas neck which is the same twist lock joint as the radiator, weld it into...
It would appear to be a torsion bar suspension(torque arm inside front tube) with hair pins for locators. If the welding was done poperly, it...
You can reach down into the hole with a wire welder thru a washer and weld the washer to the broken stud but what I do is weld a 3/8 bolt to the...
I use wheel baskets on the front wheels, tie them down first, then pull the car back tight with crossed rachet straps in the rear. As always it is...
check to make shure you or someone else did not use too long of a screw some where in the door or there is a peice of sheetmetal or something,...
Yes, ther is a lock bead that goes in those rubbers they were in there from the factory, 46 to 55 chevy rear window rubbers and quarter glass lock...
Be vewry, vewry careful welding galvanized metal it puts cyanide in the air, that green smoke that it generates is VERY, VERY toxic. Only do it...
Separate names with a comma.
The Jalopy Journal