The Jalopy Journal
No residual valve on rear as I was told that any master cylinder produced after 1981 would not need because the wheel cylinders have cup expanders...
Firewall mounted
Vehicle: 1951 Cadillac, OEM stock drums up front, 1989 Chevrolet, 10 bolt rear end with OEM Chevrolet drum brakes (self-adjusting). Master...
1951 Cadillac 331 V8 5.4l. Bored to a 365. Isky cam, fresh machine work, all new bearings, new Falcon Global pistons, new Hastings rings, new old...
Looking to change exhaust headers out to a pair of Sandersons. With that the stock generator/alternator mount goes away. Looking for options and...
Looking for information on the pinion yoke. Original 51 Cadillac rear end. Specifically the spline count and if there is a different yoke that can...
Thanks. Yeah was just sat up up there.
Can someone help me with what this port is for? Offenhauser 1080 , 2x2 Stromberg 97s, Cadillac 390... Thanks! [ATTACH]
The sending unit is high on front face. Z shaped line to get lower in tank? You mention drilling thru sending unit housing. Do you mean the...
No sending unit is on front of tank. Fuel supply is lower left (driver side) front corner
Trying to revive my original fuel tank. Tank has been cleaned and recoated/sealed. However, the fuel supply outlet is clogged. My question: Is...
Anyone?
trying to get my vacuum wiper motor operational. does anyone have a schematic for the vacuum system on a 1951 Cadillac (331) Thanks, Cody
Thanks. I can see the bracket. What year is the motor in the pic?
I have a bracket like the attached picture. I cannot for the life of me figure out where and how it bolts up. Anyone have a picture or some...
Yes, I understand but if you look at the specifications for each they do not match, dimensional wise. I stated this in my original post
I ordered from Michigan Truck Spring. Easy peasy...
Series 62. Yes I have chosen both 61 and 62 on Rockauto and they list two different bushings. One from Dorman and one from AcDelco. Both are...
Car is running tip top. Driving is good however I have a slight float/shift in the rear when letting off throttle. I suspect bad leaf spring...
Upgrading generator to a 1-wire alternator. Late GM model. My 51 Cadillacs wiring has been updated with a TopStreet performance 20 circuit...
Makes sense. Thanks for the info
Here is the unit. It appears to only have one heater inlet. Shouldn't it have an inlet and outlet for coolant? Am I missing something?
I have a Unity 225 series spotlight. Need an A-Pillar mount for driver side. Anyone know where to source? Pic attached. Thanks!
Thanks. I know ZERO about connection or hose routing. Have a diagram per chance
Yes
I have an old Artic-Kar ac unit from the 60's I believe. I cannot find any documentation on and want to put in my Cadillac. Anyone have any...
Next bearing removal. Any ideas?
Yes sir
How do I pull the axles out? And do I need to worry about spline alignment inside pumpkin?
Ty sir
Separate names with a comma.
The Jalopy Journal
