The Jalopy Journal
Redo32! Thanks for reading thru my post and realizing that even thou I have low post numbers I'm not an idiot. Ha ha ha ha The very first place...
Just pulled that one off the rack yesterday. Sent from my iPhone using The H.A.M.B. mobile app
[IMG]
Thanks!
Originally had 2LBS RPV installed in the system and they were causing the fronts to drag and lock up. I removed them but kept a coupler where they...
Thanks bob. Ironically went thru those steps a couple nights ago. I get enough over the counter parts to know that 'specks' vary after they have...
Good morning! Here's where I'm at currently. I've taken a step back from trusting the major manufacturers advise. Last night I did an evenings...
Like I said before in my original post, I'm not having an issue with locking up at all. Low volume is my issue. When I originally purchased this...
What was his solution? What fixed the runout?
I am absolutely using a proportioning valve. That is not the issue.
Thank you! I appreciate everyone's help!
What product do you prefer using?
Miker. Thank you! I'll try your suggestion tomorrow. I didn't mention that the rear end is from a 1955 Chevy. Other than paint there's nothing I...
Yes. The guy I buy my parts from has been in business for longer than I've been alive so he knows I'm going to pick his brain when I come in. The...
I understand that pressure doesn't care about line size! But don't wheel cylinders require volume as well as pressure?! Sent from my iPhone...
Seb. It's a CPP proportioning valve. I called them and verified it was built in. I also tried giving the brakes a quick double pump to build...
Not sure why is sent copies. Sent from my iPhone using H.A.M.B.
[IMG][IMG][IMG][IMG][IMG][IMG]
Yes. Reproduction GM master. Sent from my iPhone using H.A.M.B.
Hello. I'm a bit cornfuzzled and hoping there's someone out there that can lend some help. Normally two heads are better than one and maybe...
A buddy of mine used a 1965 mustang tank in his 1952 Chevy. The spare tire well had to be removed, but it ended up being a slick install....
Originally I ordered 12 comp cam lifters from Summit part number 99277-2 I entered in the appropriate info and that's the number they gave me....
Thanks for all the info! I stopped over at the machine shop down the street from work yesterday and ran through his books. We came up with the...
HEY! I was adjusting the lifters over the weekend on my 1952 Chevy with a 1960 235 due to the fact that they sounded like a noisy typewriter. All...
Hey bob my middle name is Murphy's law so let's hope this is an isolated issue and my bad luck doesn't rub off of everyone else!! The little...
Just came in from the garage and I wanted to give ya a heads up real quick as to what I found! The float in the carb closest to the firewall was...
That might explain whats happening here! What did you end up doing and what did he say about this problem?
Mechanical, looks like I'm running to the hardware store for vacuum and file pressure gauges! It seems to me that the needles and seats are dirty...
The Rochester's did leak while the car ran, but I chalked that up to them being known for there leaking issues.
They look brand new, but who knows? The gas that was in the car varnished over and the Rochester carbs leaked for months with out the car running,...
Separate names with a comma.
The Jalopy Journal
