The Jalopy Journal
Hi there, I just made a post earlier today in H.A.M.B. and it got deleted it says cutoff 1965? Are we not allowed to get advice on...
Love the 57 Chevies, thanks for posting this!
Thank you again guys
I dont think you understand, I got the green part to fit snug ( horizontally) but I need to know how to tip the blue edge down without stretching...
So you are basically saying I wont be able to get both curves to fit snug if I dont use a bead roller. Thanks.
If i dont have a block of steel, could I use a piece of wood? 2) Also if hammered the tipped blue area in the V... would that not disrupt the...
I have a Shrinker stretcher though
Thank you for the reply, please can you elaborate on how to roll the break point into the steel in the line? I do not have the luxury of a bead...
GOOD Evening, I am making a patch for the inner fender wheelhouse. I managed to get the upper piece to fit relatively snug: [ATTACH] So how...
Good Afternoon , https://imgur.com/a/jiPVXJ6 The top of this metal patch (red circle ), the edge is slightly high; it wont bend (as much as I...
Not a bad idea
Hi there, How snug does the patch panel have to fit? [ATTACH] https://imgur.com/a/qGCswhx I am planning on panelbonding and then screwing...
Hi there, How snug does the patch panel have to fit? https://imgur.com/a/qGCswhx I am planning on panelbonding and then screwing in tiny...
It's not the location that matters, there is a bloke who let's me use his driveway.
Never welded in my life before. Why cant I just put a dab of paint in the hole method as detailed above?
You're 100% right. But guess what I dont have the luxury of a driveway ( I Live in an apartment ), and I am an office boy, and fluxcore welding...
Here in Ottawa people are selfish, they dont like helping others.
Good Afternoon, I am installed rust patch on the inner fender /wheelhouse, I dont know how to weld so i have to resort to pop rivets. I plan...
Good Afternoon, I am required to make an "L" shape, with a 90° curved lip. As you can see in the pics; I am having an issue at the 90° part...
I dont know how to weld , if I panelbond it it would need an extra 1 inch of overlap, I could rivet it together. what if I just put the entire...
What car is this for?
Did you click on the link? What did you use to shape that? Thanks
Sorry https://imgur.com/a/g4KOeRU
Good Afternoon, In the picture, you can see a 22ga sheet metal, the red arrows show the direction I want the metal to go and the blue the...
Separate names with a comma.
The Jalopy Journal