The Jalopy Journal
VR1 or Torco.
Check with a different mainstream supplier like PPG or SW. They may still support that color with their toner line up. Although " red " toners...
A pvc valve is like a $10-20 part regardless of the application. For example Purolator # PV774 for SBC lower vacuum applications.
I have a couple sets of those . . . SBC
If you're scuffing and want to go directly to paint. Like the jam areas on a DD/GG. Scuff with gray scotch bite. If you're painting the exterior...
I would add to this, get closer ! Most people that haven't done this professionally. Are spaying way too far away from the surface with a hvlp...
Are you looking for better flow, out of the gun. Or, flowout on the panel ?
I have a Autometer ultra lite, wideband AFR gauge. In my OT DD, works great.
Isn't a non-metallic silver, called Grey :cool:
It's also kinda hard to believe that, that information has been provided to you. But based on your previous comments. You are not interested in...
There are a shitton of silver variations. The issue is they are silver. They are/look like, metallic flake. Your best option to look at, may be...
Glad to hear you got it fixed up, to where you want it. But, I have to ask, where are the pics ?
Usually you mask items. With other items called masking tape, and masking paper. Preferably automotive paint grade.
Usually for re-flowing clears, about 600 wet is common. If you feel that sanding, may not be able to get your surface perfectly flat. Without...
For a quality, easily machined, higher strength, heat treatable if needed, relatively inexpensive steel, round stock for lathe work. My go to has...
If you are re-painting the car. Doesn't really matter. You will be removing all of it, regardless of how thick it is. If you are going to...
It goes where you need it to go. To accomplish what you want to accomplish.
You only need weld through primer in lap/pinch weld type joints. In the HAZ. Where regular automotive paint type products will burn off. And, you...
The 93-94 4l60e pump body ( holds the front bushing / rotor ) last 3 casting #s 132. Will retro to your 90 pump cover. If the only issue, is with...
That looks like it's wired per the type 1 diagram, for models MD/MK/TK. That tcc signal switch is the final/only ( switch to close to ground )...
Do you know what year your 700r4 is ? 81-86 ( possibly to 89 ) you can control the lock up. Hydraulicly/mechanically in the valve body. Iirc....
Weld through primers are for resistance spot welding. For mig plug welding, they should be scraped/cleaned from the base panel. Once they are...
The orange piece that Moriarty shows. And the red piece from alanp561. Iirc. Used to come in different lengths for different steering...
You're also going to need to find out what con rod/bearing they went to.
Mile high cranks in Denver.
Probably just a 64-66 truck with a '62 grill on it.
Depending on how lose they are, you could have them knurled possibly. But the best fix would be to find ( or have made ) bushings with the correct...
For as short of a taper as you're going to need. For a ring compressor, just use the compound.
Theres a couple on ebay . . .
I'm not asking about someone with no experience and no equipment. That doesn't realize what the difference is. He already owns better quality...
Separate names with a comma.
The Jalopy Journal
