The Jalopy Journal
Congratulations, and welcome to the every day is Saturday club!
I have to assume these are cap screw rods and not a bolt and nut. I if this is true you won't need to resize the rod as it doesn't have an...
Bronze tip on fuel pump rod with a cast cam is not only unnecessary it simply won't work. Cast is much to porous and will abrade the bronze. Also...
No doubt the wavy disc is dangerous, the newer style with the turned up edge is much safer. Of course a person wants to have their wits about them...
Great show,videos, and pictures! Thanks Travis you and misses Roy Boy always do a great job!
While pumping gas as a kid at my dads Mobil station I got to fill up a green GT40, in my memory it was a darker green than this one. It was...
Nice shots from a killer show! Thanks
Outstanding as always! Thanks Dan
Ok guys here's the situation I used Dykem to scribe for patch panels and door gaps wiped it off with acetone when finished da'd with 80 cleaned...
I'm all in on the ready to run or a Fast easy run no box just a coil. You get electronic ignition and an easy to adjust timing curve.
Having worked on small block checks for fifty years thirty three of it full time in my own machine shop I have never seen that main girdle / cap...
Take both heads to a machine shop and have them magnafluxed, right now you know that there has been water present not where it came from.
My guess is that the pickup tube has rotated down and sitting on the bottom of the pan causing cavitation. For me that's the thing that lines up...
Having been a automotive machinist for 35 years my advice is find a good shop a pay them to do it. Take them the new pistons You said you have a...
I'm glad I read this as I'm also missing these brackets. Thanks Guys
Actually the corvette length pump is a little longer than the short pump If measured from the mounting flange to the face of the fan hub the...
The only way to know is to color the tip of the valve with dykem or sharpie and pattern it. The tool from Manley might work ok with stock rockers...
In that pressure in the cooling comes from thermal expansion, if you are seeing pressure in the first minute or so its a fairly safe bet that its...
I'm in the midst of building one right now, I'll post some pics eventually. Oh bye the way next time your a Buccees try the nuggets.
Separate names with a comma.
The Jalopy Journal