The Jalopy Journal
I did include the master on my bleeding process. Unknown if any air came out as I only cracked the lines. Same with proportioning valve. Drove it...
Follow up: I installed a 10 lb residual valve on the rear at the MC. Bled the brake system ( again) including the proportioning valve. ( no sign...
Good video. Never had a problem with what is basically an OEM system before, but if a 10 lb residual valve would fix my problem, who cares ? My MC...
No residual valve in the system. Only the OEM proportioning valve.
No other valves.. New rotors, no pulsation, but you’re right, that’s easy to check. if anything, my adjustment might be too tight. But I’ll try...
I just tried it. I’ll admit it feels a little better after 2 pumps than just depressing the pedal. maybe a bubble trapped in the MC or the...
Thanks for all the ideas. The rear end is a full floater 14 bolt so it’s an effort to get the drums off. When I first installed new drum on new...
Well I’m back with another “ simple” problem I have yet to resolve. My brake system includes : 1” bore corvette style MC. Front calipers with bore...
As a follow up - and admission of my mistake - I found the link between the steering box ( pitman arm) and the steering arm ( mounted on the...
I can accept the lift from the tire inclination. It’s very small when the bound up steering parts are removed from the equation. I built this leaf...
Ok, just came in from experimenting with RodStrace’s idea. I disconnected the steering box and sat the truck on the ground with home made...
Here is a pic I have handy, the shackles are at the rear of the springs.
Been using this site for years to solve my ( car) problems. Now I have a question I can’t find an answer to. I’m running a Dana 44 straight axle...
Separate names with a comma.
The Jalopy Journal