The Jalopy Journal
Here's mine
I'm getting ready to buy a rotisserie to do my 63 Falcon H/T and I'm finding out that the prices are all over the place. USA Tools and Equipment...
Five inch dropped front axle and mono leaf. Thanks for all the nice compliments. This started as a one year project with the intention of using...
I used a Last Refuge body with a 302 block and 289 heads, the windshield has been chopped and laid back, I fabbed the generator bracket and the...
It runs and handles great. Now if I can just decide on a color and what to do with the interior. Any ideas would be helpfull.
Here's Mine
Just got it finished
Thanks for all the info, but just to be clear I'm just talking about the center section not the X member. My plan is to remove it by drilling or...
Just picked up a 40 Ford deluxe coupe with a 59B flathead, 39 trans and stock rear. The car is in great shape and the body has been off years ago,...
The bearing is a 1400 I can't tell you what the A measurement is without getting under and measuring again. I used an additional spacer sleeve to...
I was very carefull to incorporate a pedal stop with the first bearing and when I installed the second, I adjusted it so as that if I ever got...
Not enough room for the throw out fork. I removed the Mcleod bearing last night (it kicked my ass) looks like total seal failure. I'm starting to...
I wish I could go to fork type but I just simply have no room. The ironic thing is I have a 32 roadster with a hydraulic bearing ( I bought it...
My RPU is almost done. After three years of carefully putting this thing together I have suffered a frustrating setback. The RPU is channeled and...
If you don"t have the calipers or rotors you're going to find these expesive to buy and hard to find. You will need some unique attachment parts...
here's mine
Ford tech five years, service advisor, service manager, parts and service director and now own two Ford dealerships. I love cars, the car...
Hey ibbuckshot, Has Norb called you a whining cry baby yet? Because if he hasn't he will.
Thanks, I appreciate the help.
I need help. I'm finishing up my 29 roadster pickup and can not figure out were this bag of rubber door bumpers go. The doors are repops so they...
Norb, No matter how hard you work at trying to build your business, you will not get there by leaving a pile of unhappy customers in your wake.
Lets see, order a body, bed, or frame based on advertised promises. Send all the money up front to a PO box, no credit cards please and listen to...
Yup, the frame has been powder coated, plumbed for brakes, gas and put back together. Will post pictures soon. Thanks for asking.
Check out Chassis Engineering. I used there kit to install a small block ford in my 37 Ford and it worked well. Firewall has to modified slightly...
Looking Good !
The headlights are 31 model A, the body is 29
Frame is set up for small block ford and T-5 trans
I think the picture is causing an opptical illusion. The drive shaft runs down the center and the pinion is centered.
Finally got all the chassis fab work done and now it's time to take it apart for the last time I hope and get things painted and powder coated.
Separate names with a comma.
The Jalopy Journal
