The Jalopy Journal
[ATTACH]This is what's on the car now I believe they are 1953
Wanting to change out my 210 tail lights to the bel air light assembly and was wondering who was a good place to get them thru?
has anyone lowered the front of a f100 without doing mustang 2 coversion? how do you do it right by replacing the stock beams and were do you find...
yes the wheel base has been stretched and yes it is still cross over steering. the problem i have is when the truck is not moving and you turn the...
btt
anybody have any pics or links for what to use or built for the front pan hard and install on my 36 ford truck the wish bones are split and the...
looks good! 5in chop wow i did a 3in chop and 7in channel(way to much channel hard to get into truck)
on old jeepers trick on the trail was to use a bumper jack to breake the beads on the trail.just take the tire off and lay it on the ground put...
this is my great uncles dad's shop in down town puyallup washington from the 20's
just follow the old cars and you will find it and yes amocat is the little shop at safeway and it will be open house i can't wait!!!!!
nice!!!!thats usin your dipstick jimmy!!!
very cool!!
try jacking the front of the car up high as you can get it and open the rear bleeders and let it gravity feed i had to do that on my dually...
thanks!!!!
ok then but i should be able to undo the clamp and slide the outer column off ans make my cut and reweld then with no problems?
getting ready to put the f1 box and column in my 36 ford truck but i am needing to cut in down a bit and was wanting to take it apart(column from...
what about the 3M weather striping glue messy but that stuff sticks to anything!!
1967 fleetwood
3M panal bond is the way to go works great!!!!
you could try it the worst that could happen is vibration its a 8.8 with 3.73 posi you will not lose $$$ you can always resale it .........but...
thanks for the info that is just what i was looking for.yes i to want to keep my under floor braking and clutch!but has any body used the newer...
i am putting a small block and muncie 4spd im my 1936 ford truck and would like to use a hydraulic throw out bearing has any one used one of these...
Separate names with a comma.
The Jalopy Journal