The Jalopy Journal
I'm not sure, I know they have a max volt rating, but there may be some out there with only a max 6 volt rating? They're very cheap and can be...
The condenser will stop surges and protect the points from pitting. Their use is to pass AC but block DC, they will also stop noise in your radio.
Thanks for the tip
I like this do it yourself video Never tried this I heard this is a guy here on the HAMB http://www.youtube.com/watch?v=xkcm3rh60p0
Wish I could remember, it's been sitting around here a few years. I'm slow getting to projects, that's why I'm geeked when I get to one! I'll look...
Just installed the new dash with Dolphin gauges _ I think it looks good, I replaced the lights with blue led's and I'm hoping it cools down a bit...
You're right. I'll look around for some used ones, the price for new replacements is a little high if I'm going to weld and paint them Thanks Harry
I Frenched my headlights and taillights are set back 59 caddy, but one headlight ring and one taillight ring are in bad shape. I really don't...
Don't feel bad - Clifford calls it a 216 also...
The 52 and 53 had the 215, the 223 was used 54 and later. The blocks are very similar. http://en.wikipedia.org/wiki/Ford_Straight-6_engine...
Good job - lots of good ideas for me to borrow :D Thanks alot for pointing me there
Jim, still running the 216 inline 6 but put Clifford headers on it and there is no room to hook-up the old stock linkage. Missysdad, I must be...
Never mind I just stopped over to 'OLSKOOL RODZ' and found this post Really good idea I think....
Anybody run a hydralic clutch. I'm thinking about a hydraulic cylinder and not the throwout bearing. If you have - mayby some pictures or what...
I think this is a 54 Ford owned by Ed Croozer He flipped the front bumper over - I think this is one of the best looking Mid 50's Fords I've seen...
looks good Alot better then mine looks - Might be I used too many teeth - I used 17. Or don't have any turn signals mounted yet? [IMG]
$10 off any purchase of $25 or more Use coupon code THANX10 www.eastwood.com I just got a couple bottles of powder coat powder
Now you tell me! I made a set last year using a set of Patriot headers - but they were made for a truck and all I used from them were the flange...
I kind of like slots, just wish I had 15's because the 14's don't fit the rear discs [IMG] [IMG]
More pictures [IMG] Clifford intake with the Vintage Speed adaptor to run three Holly 94's [IMG]
Got a set this summer and they are a major pain - 1953 with the 215 - I had to cut the collector flanges off - On the rear I had to remove the...
Hale Michigan about 40 miles West of Lake Huron - 1/2 way between West Branch and East Tawas - abt 100 miles south of the bridge and if you know...
Thanks I see that now and the Tubular A-Arms seem to be the way to go but the cost:eek: I do have access to a Bridgeport and a lathe across the...
Was wondering if this setup would work on 52 - 54 or just 55 - 57 Fords? Most likley not as they are king pins. I'd like to put disc on the front...
Is this your auction?
Your tail lite is out or do you mean your brake lite? If it's your brake lite, then first thing is to make sure the light is flashing when you use...
Thanks for the update, sounds like some good deals to be had, I do need a headliner. I'm waiting for the catalog, I just hope I remembered to...
OlDawg The picture is a stock 8" in a 53 The brackets fit all 8" and most small bearing 9" You can also use the 9" rear from a late 70's to early...
I tried to make a set of Patriot truck headers fit but I made a mess of those - pretty much have to use the flanges and start from scratch. I do...
Got a set of Clifford headers for the 215 Clifford says they'll fit 52 to 64 but They are way off from their site car headers [IMG] Truck...
Separate names with a comma.
The Jalopy Journal
