The Jalopy Journal
I also put 1” blocks sandwiched on the lower A arms and had to cut the rubber snubbers because they were hitting
Mine settled also after about a year.[ATTACH]
I emailed Charlie last year for a distributor. He answered all my questions and the price was in the ballpark around 350.00 I think. He responded...
You could try Owen’s salvage in Texas. I got a quick response and they were able to help me. 806-447-2581
Too freaking cool !!!
Congratulations! The brake pic makes it easy to see
I believe the bleeders should point/ face up.
That
Another great idea! Thanks for the link
Thank you! That looks really slick. I would be interested to see your write up on the conversion!
Do you have any pictures of your radio upgrade or the parts you used? That looks like a great idea for my 53! Thanks
Awesome find! That should come in handy!
[ATTACH]
Yes the 53 is similar with 2 cables. One from hand brake to under car equalizer and one continuous cable that runs to each rear brake with a yoke...
Thanks again! Unfortunately PO cut my cables and I will have to find new ones or adapt something else.
Cool! Thank you! Did you use the 53 parking brake cables or use the mustang ones?
Working on the rear brakes on my 53 customline and noticed that the previous owner eliminated the parking brake levers. I saw the sticky about...
That is an awesome store display! Would be cool to shop at that store!!
I had really good luck calling Grant tech line and they were very helpful in figuring out the spline for a ih scout I once had.
Nice job!
Thanks everyone for your suggestions and insight. A buddy of mine who is in my car club came over to look at my frame. He is a retired body and...
Im not sure but I thought there might be a difference in the front sheet metal attachments But I’m far from sure on that. One of the first...
Not a bad suggestion but from what I see I think I would be chasing the welded seam almost up to the engine compartment from the rust separating...
Thanks down-the-road and okiedokie! You members on this site are very helpful!
Does he have a junkyard? Do you have his number? Thank you
Great looking automobile!
Wow! Thanks they do have a few. I suspect I will have to check into shipping unless I get lucky and find one closer!
Thanks for the reminder, I’ve used Owen’s salvage on small part purchases in the past. Very good experience. Might have to bite the bullet on...
Good looking vehicle!
Separate names with a comma.
The Jalopy Journal
