The Jalopy Journal
Sold
[ATTACH] [ATTACH] [ATTACH] Early 24 stud Edelbrock heads, some corrosion as pictured, one fin damaged slightly. $300 OBO
Bump
Really nice quarter. Take a look make an offer. Doesnt hurt to ask. Can bring to the Sunflower swap meet in Wichita next weekend.
Lowered price. Make offer.
28 29 model a roadster drivers quarter. This was a second and has an unfinished trunk edge. Was going to use for large area but was able to...
I see that now.
Looking for help identifying hubcaps. Found some hubcaps but don't recognize the logo on them just wondering if anyone else has.
Second set.
First set of pics.
Just thought I would post an update. We decided our problem was spring wrap. We put on new stiffer springs which improved the problem but did not...
Will be there with my truck and my sons truck.
Calipers do slide freely. I am not running a combo valve just a proportioning valve. Looking at the springs today there is a considerable amount...
The more I look at this I believe that axle wrap that eciguy suggested is the most likely cause. My question is what can be done to fix it without...
This sounds like it might be my problem. after looking at the suspension again. You say the axle wants to move rearward but as I look at it I...
It is a parallel front and rear spring setup. Axle is out of a 48 ford pu. Factory spring and axle with no modifications. 6.5 inch bolt on...
Still pulls to the right in a med quick braking action. So we swapped front rubber lines side to side re-bled and tried again. Same thing pulls to...
I removed the line replaced the tee with fewer fittings, line looked ok but went ahead and made a new one. I will get it all back together and...
Well I rechecked calipers for movement and both calipers slide freely. The only thing I have left that I havent pulled apart apart is the front...
I had a residual valve plumbed in before the tee, it is now removed no difference before or after. Master cyl is above the brakes (mounted on the...
I will double check that tomorrow. Right side will lock up almost a second faster than the left. We are going to pull the left hand line and tee...
Everything on the suspension is new except the springs and the axle itself. There is a slight amount of play in the king pin where it slides...
I am now running disk brakes up front. But the drum brakes acted the same way. Both caliper seem to move equal distances when brakes are applied....
Need a little brake help. Give you some backgound info. This is in a little hot rod 1941 pickup weighing about 3000 lbs. Has a 48 ford straight...
Thats what I was doing. The block I was going to use was the early 283 which had a steel crank and and a std bore. The crank that was in it had...
Thanks again for all the help. Learned a lot. Never assume anything, 283 had 2 style cranks and 2 different block designs, found out I have a 327...
Crank # 2 is listed on mortec site as a 283 small journal crank from what I measure looks to be a 3" stroke which would make it a 283. I pulled...
I have called federal mogul on the pistonsto make sure they were boxed correctly and they are to call me back. Just from what I can confirm here...
Here are some pics #1 picture crank flange, no casting marks left on this crank it is a forged crank. This is the crank that fits in the block but...
Separate names with a comma.
The Jalopy Journal
