The Jalopy Journal
Are you removing/replacing the behind the seat tank or moving it to under the bed between the frame rails? If your keeping the behind the seat...
Just an idea, but I had an ingition switch go bad that drove me crazy for about a year. Car done similar things like you discribed. I screwed with...
I have a 337 I put in a 52 F6. It takes a ton of room compared to the 239 V8. To keep the front end the same (Radiator, grill, steering box), I...
Here's a picture of my 337 sitting in a 52 Ford F6 that I'm in the process of building. Hillbilly Werewolf sold me this motor a couple years ago...
It's the front spring u-bolts.
Yeap, It's a dual point distributor for a 337 flathead lincoln. I've got one on mine.
I'll second the anti splatter spray. I've worked black iron fabricating for years and its the best you can get. It won't mess with your weld...
Your stuck flathead probably has the valves as stuck, if not more, than the piston. Pull the intake and see if the valves will pry up. I bet as...
Does anyone have a book listing or can tell me the torque specs for the Lincoln and Ford 337 flathead engine? I need the torque specs for the...
Thanks for all the info. Also that is one sweet looking 337. I was working a little on the motor yesterday and cleaning it up and discovered it...
I need a set of oversize pistons for a 337 Flathead. Does anyone know of a supplier? Is there another sized motor that the pistons will swap out...
Y'all make some good points one way or the other on the hardened valve seats. I could go either way and feel confident. I'm going to try and find...
I have one 337 ford truck motor that is cracked between the intake valve and cylinder on 6 out of the 8 cylinders. There is no hardened seats in...
For $12-$20 a cylinder bored and honed is cheap enough it makes sence to bore and hone the cylinder out. Lets hope I can find someone around this...
I figured if I took the engine to get bored I would go ahead and have the seats put in as well. I've never had an engine bored so I don't know how...
I just picked up a flathead lincoln 337 in hopes of putting it into my truck. I pulled the heads and the cylinders have quite a bit of a ridge at...
Separate names with a comma.
The Jalopy Journal