The Jalopy Journal
So, now, does anyone of you know what is the diameter of the core plugs on a 65 Olds 330ci ?
Thanks, Hellfish, for the right word !
Not at all, look at my second message and the joined picture !
I'm talking about the holes on the cylinder heads which was used to cast the engine block. And then, closed with steel caps. Look at the picture,...
Hello, Can anyone tell me what is the diameter of the sandblasting tablet (I'm not sure of the technical word) of my 65 Olds 330ci ? I measure the...
Yes, sorry, my engine is 66, the transmission is from 73 ! Many many years, I don’t know exactly ! I suppose it will not work well because of...
No fluid in the vacuum fitting when I remove it ! And I already modify the screw ! :(
My engine is from '66, so this modulator is 58 years old, not yet retired in France ! However, I saw new ones in Rockauto website and I think I'm...
Hello all, I'm looking for information regarding this "vacuum box" (see picture) which is connected to my Oldsmobile TH350. There is a screw and...
Hi, If there is some who use Auburn tires 7.50 x 16, at what pressure do you inflate them ? Thanks !
Hi there, swedish fellas, If there are some swedish guys on this forum and if one of them has gone to the last Old Style, maybe does he know the...
Thanks to all, you confirmed my opinion ... an arrow plus the word inlet means this side is the inlet !
To those who have used Smithy's mufflers, I've a doubt concerning the direction of the mounting ! There is an arrow on the muffler and engraved...
Is your "Ahhh" a negative or positive one ?
'66 Oldsmobile 330ci with Holley intake manifold and 2 weber DCNF carbs, hoping it works well ! Adaptor between carbs and intake manifold is home...
C'est vrai, çà ! :D
Thanks for your compliment ! I hope that the pro will know how to proceed to keep this good concentricity !! [ATTACH] [ATTACH] [ATTACH]
Thanks Dan for that ! The yoke is just tack welded, yes, because my shaft is composed of 3 parts, the cut shaft, a machined sleeve which comes...
Hi guys, Today, I prepared my transmission shaft, narrowed to fit on my 32, before welding the 2 parts. I've built a bracket, with bearings, to...
Thanks a lot xix32, that's exactly what I need ! Your dimensions are perfect ! About the other suggestions, thanks too, but I haven't any square...
Sorry guys, my question is not "with or without" but where exactly, I talk about dimensions, must I put them, according to the original Ford...
Because I want them !
Hello, Can anyone of you can give me some dimensions to assemble the outside door handles on my 32 roadster ? Some pics of the inside mountings...
Does anyone of you, guys, can tell me if it's necessary to grease the palette inside of the 32 (or jeep) wiper vacuum motor to have a better...
Thanks guys !
Can anyone tell me what is the thread of a 40 Ford spindle grease nipple ? Thanks !
Installed angle is already defined, the car is complete, just need to replace the springs for ones more adapted !
Hello, Does anyone of you can tell me what lbs value choosing for rear shocks springs to assemble on a 32 ford coupe with fiberglass body and...
Thanks a lot, guys, I just hope that I will find the recipes for these PPG or Dupont codes !
Someone say that this Cordoba Gray was the color of the Ford of Bonnie and Clyde !
Separate names with a comma.
The Jalopy Journal
