The Jalopy Journal
I have a set of 54’ 331 Chrysler hemi heads being reconditioned. I ordered new valves, springs etc for my machining guy to use. The intake...
] [ATTACH] [ATTACH] This build is taking way longer than what it should….
[ATTACH]331 Caddy using 390 heads, Isky cam, SU carbs (not installed as of yet)
[ATTACH] I’m thinking for a 35/36’ but the cut out for the windshield hinge is throwing me off.[ATTACH] I believe these to be for a 35/36’ 5w but...
I had a bad experience with the Howe HTOB. The application was for a GM 4 Spd which I used on a non world class T5 and standard GM clutch much...
I ordered a set last night thru their website and Just spoke to Amanda a few moments ago. She said that the amount on hand is going fast but...
I think I found my answer...... possibly an open air delivery truck of sorts. Although the one in the pics looks to be on a big truck...
I appreciate Pete posting while I’m on the road.... it’s appears all 36’ grill/hood/dash etc also to be a standard small pickup running boards....
Correct me if I’m wrong but I think the header panel on a 32’ box has a slight arch on the top where 33’ and up are straight across.
Thanks 36-3w for that info and Uncle Buck for both info & pics!
Thanks Mitch!
Please school me on 35/36’ Fords.... Is the rear garnish moulding interchangeable btwn a 3w and 5w? Thanks in advance -Kirk
I found the same to be true on a 67-72 C-10 board. If I didn’t have video of the issues with the box I know they would have denied any wrong...
Before shipping out the third box I asked if they tested it which they said yes, it’s worse than the other 2 boxes put together. I’m not here...
Cool, thanks for the reply. I’m on my third power Vega box straight out of the box that’s defective.
I wanted to build a shop truck that I could drive every day any distance with ability to pull a trailer etc. (Please don’t bash me I did use a...
It’s a very common problem that I’ve encountered with any 32-34’ cab I’ve done work to. A lot of times the sheet metal ear/flange in the bottom...
I hope to have a 34' 3w completed enough to take....
Thank you Bob! I appreciate your effort!! With the other trim pieces being off of a 3w I'm confident that these are off the same 3w as the...
[ATTACH] [ATTACH] I recently acquired a box of parts that has been sitting in an attic since 68'. It had parts in it from when the gentleman had...
I'm 5'7" 200lbs and fit just fine with a 5" channel and 4" chop. My buddy is 6' 4" and fits in the passenger side but him in the driver's seat is...
[ATTACH] This one weighs 2600 lbs sbc/350 turbo/9" rear axle
Lots of interest but still available
[ATTACH]
Sold pending payment
[ATTACH] This is an old HotRod that belonged to Jr Walker of Jr Walker & the AllStars, he had the hit song "Shotgun" An early 60's Chevy was...
[ATTACH] 1934 Ford pickup Typical NE rust out meaning it needs all replacement panels which are readily available & cheap. Other than drivetrain...
[ATTACH][ATTACH] The stock crossmember was swapped out for a Model A one as well as wedge cutting the frame approx 3/4" at the top of the frame...
I've always been a fan of channeled hotrods especially 33/34's although I may be a little biased....[ATTACH] [ATTACH] [ATTACH]
I am helping a good friend fix a noisy throwout bearing on a 59' Ford F100 truck that he just bought. It's a Y-block column shift truck. When we...
Separate names with a comma.
The Jalopy Journal
