The Jalopy Journal
Getting ready to fire up a 302 GMC that I've been building awhile. I need the lash and valve adjustment sequence. I've found the ones for the...
Don't know where these came from, Christmas gift. The drivers side had frozen onto the spindle so I'll be getting new ones anyway. Destroyed it...
How did I do that? Didn't mean to reply to my own post. Posted using the Full Custom H.A.M.B. App!
Posted using the Full Custom H.A.M.B. App!
1952 Chevy truck. Upgraded to taper bearings over the winter. After about 100 miles truck drifts and hard to keep in a straight line going down...
Go back to the beginning and read the rules about this site. Then decide if it's right for you. Posted using the Full Custom H.A.M.B. App!
I run a '62 235 with a dual Rochester and headers set up in my '52 Chevy truck. T-5 trans with '79 Trans Am rear end with Richmond 4:11 gears....
How did the tie rod ends fit the drag link? Are they all the way in or out of it? There is something amiss if there is no way to align it? Are you...
Isn't the adjustment in the draglink? I had bump steer badly and put caster shims under springs onto axle pad and cleared it right up. Posted...
This is the clutch master cylinder I'm looking for. 1" bore slave cylinder. Has anyone used the clutch slave from a 60 chevy truck which is 1"...
I've done hours worth of searches and even spent time going over the catalogs at my local NAPA and have come up with little information. 1952...
Some guys would go with the electric, others the mechanical. Seems you've already made up your mind. Which do you want to run? Posted using the...
Well dang it. Didn't know that one. Posted using the Full Custom H.A.M.B. App!
Oil just oozes out of it. I've had the valve cover off mine while running and as long as there's oil coming out of the rails for the rockers then...
I've got them rebuilt and on my Edmunds intake. Everything hooked up, looking good and ready. Now for the synchronizing. Is it possible to use a...
I've got the sandwich copper head gasket ready to install. I've read that I need to apply a sealer either aviation permatex or the copper gasket...
Thanks Hoop. That's what I was looking for. Didn't want to buy stock in the company buying all different sizes. Just a size to shoot for. I have...
What jet size will be a choice for dual Rochester B carbs on a 235 Chevy? The ones I'm going to use have in the 70's size so I'm having to get new...
Thanks for info. I will definetly look at that. But, I fixed mine. Started messing with it when I got home and had the wires backwards on the...
Yes I can get the gauge to move when the lead to sending unit is removed. I have to check the ground wire though. The sending unit is a 30 ohm and...
I am trying to get my fuel gauge hooked up in my chevy truck. It was converted to 12 volts years ago and never had gauge. Now I've gotten the 7806...
I let it set alnight to see if that would help. If not I'll try the graphite to day.
I tried a little of the silicone spray. Helped quite a bit, just wonder if I will have to apply it occasionally or if it will affect the seal in...
I just put the door glass back in my 52 Chevy truck and its real tight. Almost to the point that something is going to break when I roll the...
Yep almost certain I have it in backwards.
[IMG] Mine is the one on the left. I'm thinking the bigger lobe should be toward the inside perimeter of the door. Stare at it long enough and it...
1952 Chevy truck.
Wondering if I did this correctly? I finally got the chance to put on new door seals for the old truck. I looked at the ones on the truck and it...
Check for a good ground to body and frame.
57heaven;8645210 educated me... Why does this work better than a tap handle. Seems lik the torque of the gun would snap the tap far quicker than...
Separate names with a comma.
The Jalopy Journal
