The Jalopy Journal
The flathead in my car was hard to start when my dad owned the car. The first thing I did was fix that. Just like twenty8tudor it was carburetor...
On some models the drums are swedged to the hub. The lug studs are widen where the drum meets them.. You have to cut the top of the lug stud to...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Here are some photos. I do remember reshaping the lower latch to get it to catch just...
I did. I can take pictures and measurement tonight.
If you don't care about the studs or drum you can do what I did to save money buying a tool to use once. I just cut off the studs flush with the...
You could use the switch to energize relays for your headlights. Then you could fuse a separate circuit for head light power. Then there would...
Yep Squirrel is right.
I still like the roll of duck tape idea. Probably not traditional but it could be considered dual purpose.
What he said X3 Very happy with the carbs he rebuilt for me last year. Just bolted them on, set the idle, and the my car ran great.
Here is what I did with a couple of out of spec ford drums from my 34. [IMG]
My car started as a high school hot rod project back in 1958. My dad bought the car and tore it down and replaced the rotted out frame. That was...
More Pictures [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]
Here are some of my Pics [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]...
Here is a link to my Iron Invasion Album. The weather was cold and there where not enough food vendors. It was still a great show. Saw lots of...
Arn't those Lockheed brakes. The first type of juice brake Ford used. The drums are swedged to the hub. They stop alright. Still using them on my...
The best way to address your problems is to get a volt ohm meter and start checking what is or is not getting power. A Simpson 260 is more...
Another satisfied client of Dick's He did a great job rebuidling a couple of very beat up Holly 94s for me. When I got them back they looked...
Another satisfied client of Dick's He did a great job rebuidling a couple of very beat up Holly 94s for me. When I got them back they looked and...
I am running disk/drum manual brakes and they work good. My car is light.
Did you look at a local retailer that carries Earls Performance Plumbing. They help me out during my last brake upgrade. Rich
My wife got this one for Christmas and I had to add flames before it was installed. Rich
When I did a major brake overhaul on my Couple it did not have good pedal pressure until I adjusted the brakes then bleed the brake lines. Rich
Here is mine with new insert. Guess I should take a picture of the dash installed. Rich
Also adjust your rear brakes before bleeding. I had trouble getting pressure after a major brake overhaul until I did. Rich
Did not sound like flatheads.
Yes it is. The Motorola name comes from their first successful project the Car Radio. Moto for motor and rola as in Victrola. The gas heater not...
It takes just one back fire and the power valve will pour gas in to your intake. Rich
A calcium carbide plane blew up. So there is a shortage of calcium carbide which is needed to create acetylene.
Separate names with a comma.
The Jalopy Journal
