The Jalopy Journal
MAKE OFFER! would trade for newer f250 f150 or 4x4 truck. 1961 Ford F100. New paint, new interior, 223 inline 6, 3 speed on the floor, custom...
I wanted to do that.. I have sent distributors to RHP reincarnation to be curved and he has built me a custom one for my f100.. but, I figured...
C6 is what it came with.. I may switch it out one day.. but for now, I'll keep it... My 65 f100 with a 302 had a c6 as well.. but it had no...
I have a new project with a 80s ford 302 in it.. it came with a 2150 2bbl on top of a 4bbl weiand intake using an adapter, original 80s duraspark...
picture [ATTACH]
picture of what I have going on. [ATTACH]
Thanks.. I have a hole already in the carpet.. I had this shifter installed on a c6 trans.. its is now on an AOD. it is different but not too far...
I have recently swapped over the transmission in my truck to an AOD from a c6.. doing this the old gennie shifter I had with the new brackets sits...
...
Ttt Sent from my SAMSUNG-SM-G920A using H.A.M.B. mobile app
here is a clip of it running with the gauge... you can see the delay. https://goo.gl/photos/5qyBFmnTQbsXxHuXA
Haven't taken it down the road yet... I plan to here in a few days..okie yours is doing the same sluggish line pressure reading? Yours running...
[IMG] better Pic of the setup. Sent from my SAMSUNG-SM-G920A using H.A.M.B. mobile app
Love that this thread is still alive and kicking Sent from my SAMSUNG-SM-G920A using H.A.M.B. mobile app
A friend says I need a TV corrector.. Lokar says I do not with their newer kits. Sent from my SAMSUNG-SM-G920A using H.A.M.B. mobile app
It was a little under there.. I adjusted Sent from my SAMSUNG-SM-G920A using H.A.M.B. mobile app
[IMG] Sent from my SAMSUNG-SM-G920A using H.A.M.B. mobile app
Hey guys, I have my 65 f100 setup with an AOD I just recently installed... before I take it down the road I have a question for you folks who have...
Bill I called the number and hit 1 for sales.. I got a voice mail. I made reference to this conversation. and left my number.
Thanks for the reply Bill.. and welcome to the HAMB. I would really like to get a kit that fits my truck without having to cut and weld .. my...
It was on an engine stand .. I put the AOD on it so I could check it over before I install to see if it needs rebuilding.. fingers crossed I got a...
yeah. I just don't want to see 2k dollar engine block go down the toilet. lol. alllllthoughhhh... would be a good excuse for me to finally build...
I can certainly shoot some oil in her and spin it around. Since its been out it's been high 30s-75 or so november -december.. Its in my garage...
not a bad idea either.. I'll do that. I've got a drill tool for priming the oiling system.. would that do the job?
I had drained the radiator till it stopped last year to add a new gauge sending unit .. added 50/50 premix from prestone I believe .
Thanks. I was just wondering I have an open port there for the heater hose by the thermostat... wonder if I could put an old flex hose on there...
Thanks. going in my f100. I tried to get away from the finned muscle car look that plagues sbf.. Still not tickled about the "racing" on the valve...
well she's all cleaned up. I have it still attached to the engine hoist I guess I could run then engine tilt over more and get more of the fluid...
Hey guys, I've been re doing a lot on my F100 and the engine is out of the truck on a stand.. So far it's been a mild winter.. but we have some...
Separate names with a comma.
The Jalopy Journal
