The Jalopy Journal
Here are a few pics of my old 1969 2002 with a streetported 12A mazda rotary. Sold it about 15 years ago. Chris [ATTACH] [ATTACH] [ATTACH]...
This solenoid is very similar to the ford solenoid. When mounted upside down, debris from normal wear on the contacts gets in between the plunger...
I have personally hauled a 56 New Yorker on a Uhaul trailer, it was the galvanized one. Chris
If I recall correctly, the neutral safety switch grounds the relay coil. So if you are using the original neutral safety you would need the mopar...
This is the same truck I posted above, new paint. Radiator is 40 inches wide. Don't have any better pics, truck is apart again.[ATTACH]
Metalspecks is lacquer. Use Duplicolor's lacquer clearcoat, I've done it several times. There is no recoat window on lacquer. Chris
The pressure is low because you're using it as a return. If you plumbed it to the steering box, there would be a restriction and more pressure.
Thanks for the info, the wheels we are looking at come in a minimum backspace of 3 1/2, so your setup won't work out for us. So close! Chris
I'm trying to figure out wheels/ axle narrowing for my wifes 63 Mercury Meteor. What was the back spacing on your smoothie wheels? Might be...
[ATTACH] The picture I posted on the left is a linear pot Vintage air sells that goes in place of the old heater cable. Chris
[ATTACH] [ATTACH] Vintage air has these potentiometers that will control their gen 4 systems. Yo need 3 so you would have one unused control....
[ATTACH] Crude I know, but here is the current flow with the switch activated and the relay module not activated Chris
The diagram I showed is the way a passenger power window is controlled by both the passenger side switch and the driver side switch. I don't see...
[ATTACH] Get a 5 pin GM power window switch and wire it in like this. Chris
You can do the same exact thing here in California if the title is in the system. The problem in the OP's case is he would then have the title to...
Adam Carolla Made a documentary about this, its called The 24 Hour War. Chris
[ATTACH] https://www.amazon.com/Ideal-Industries-Crimpmaster-Insulated-Terminals/dp/B0000WU4JK I use these, you...
Just a heads up for anyone that has this tool, Jegs has the drums for 40.99. I haven't bought the tool yet but i ordered a couple drums for when...
On a car that size you should use a 11" booster. If you only have room for 9" go dual diaphragm. Chris
On cross steer, the drag link and panhard need to be the same length. With a unisteer you've effectively shortened the drag link, you probably...
No, they can't. Vintage air has vertical Superflow condensers in a couple sizes. Chris
I have the Snap-on that can use body saw blades or sawzall blades, worth every penny. Chris
It will be fine, you're under both the amp and voltage ratings. See Steve's explanation in post #58. Chris
[ATTACH]
I'd be worried about the shell with no step moving due to braking forces. Caster is adjusted by putting more shims on the front or rear control...
The narrower trailers are painted red/orange, the wider ones are galvanized.
bump
Richmond street 5 speed, Trans is used, I have never run it,it was sold to me as good. Comes with new Hurst competition plus shifter. Fits Chevy...
Separate names with a comma.
The Jalopy Journal
