The Jalopy Journal
This past Fall, I helped a buddy install a Columbia in his '37. He is also running the LZ gears in his tranny, but I believe we are going to...
About 18" of snow in the past 2 days. Should put a blade on the RPU. Happy New Year! Warren
I agree with alchemy!
Also, winduptoy suggested this to me back in September when I was having a head gasket issue. "I always torque to 55 ft lbs and start the engine...
That appears to be a Posie's 37-41 spring. Their eye to eye distance is shorter then stock. You will never get those shackles to 45 degrees and...
Joey used flex tube on version 1 with that nice little bracket as a rear support. On my banger, I run dual Porter's with flex behind the mufflers...
Gotta go shovel the driveway. Warren
Here is the previous post: Cleaning with Citric Acid "I want to share the process as I know it for fast, cheap and easy rust removal using...
What model do you have and how many leaves currently? Front or rear? You will never truly get a decent ride. Warren
That is why I mounted mine behind the rear end, but I wasn't using a QC. I found a NOS '37 front spring but it needed more arch. I went to a...
Some pictures of your setup would really help. That being said, I am running a TCI model A frame with a rear kick and flat cross member. The car...
Sorry, I just searched reamer and it came up. Guess I didn't read all the words, it was an old posting. I just had my bushings reamed with a...
There is a reamer for sale over on the parts page. Good deal. Warren
He built a nice exhaust on the 4 banger way back when. Warren
I was just talking with Charlie Yapp and he confirmed a suspicion I had in the back of my mind. Despite any flaws with the carbs, these two...
The propane test doesn't seem to produce any results. Warren
Just a review, Bert's rebuild some years ago, very little mileage, just replaced head gasket, Brierley 7:1 head, Yapp Equalizer dual intake,...
Rough idle, white smoke, kinda sounds like a head gasket. Warren
Mine Warren [ATTACH]
You could hit it Monday on your way home. Only an hour detour. Warren
You cannot edit picture without knowing which one is cylinder one. Follow each wire back from the appropriate cylinder and tag the cap end with a...
Did a couple of plug wires get knocked off during front end word and reinstalled incorrectly? 18436572 Warren
Is that fuel line Nicop or copper? If copper, either it will vibrate against the tank and break or eventually split. I would use steel or Nicop...
That is beautiful, the lines are perfect. That could be great, but the rad sits there like a sore thumb. Warren
Well, I installed the new head gasket and torqued the head as per winduptoy (Larry's) instructions. It is running smoother then it ever has....
I use the K&N 81-0400 to feed 2 Strombergs. It is rated at 2 lbs and has never failed me. It is on a banger but the 97s don't like any more fuel...
With my Brierly 7:1 head and FSIgnition, I have been running Champion N12YC plugs. Anyone with a similar setup running anything different that...
[IMG] Are you running a long style of pressure plate like this? The fingers come out closer to the throw out bearing. Warren
That is a Best 573 gasket for a model B. The Best 509 is the 28-31 gasket but Snyder's say to use the 573 on Hi-Comp heads. I just ordered a new...
Need some help here. Late in 2023, I acquired a Jim Brierly 7:1 head and a Yapp Equalizer dual intake. They were installed and ran well all...
Separate names with a comma.
The Jalopy Journal
