The Jalopy Journal
If you have a manual valve body (have to shift every gear yourself) you can leave the linkage off, if the trans isn't modified, you have to use...
If the hole is under the plug seating area it may seal when the pug is tightened, if the hole is off to the side I would put some type of sealant...
When I was running SB Chevy's years ago, I used 55 to 57 Chevy style fender-well headers, the pipes all went towards the middle like block hugger...
Wrong type insurance, but I will put it back the way it was myself hopefully very soon, I'll post pictures. David.
[ATTACH] [ATTACH] [ATTACH] Paint job by stupid thieves, not recommended!!! Besides, they ruined my favorite finish, rust and red oxide!
I still haven't heard anything about arrests? The police did print my car, some of the items left behind and my microwave used in the mystery...
[attach] [attach] [attach]
[ATTACH] I have my 41 Plymouth back! It was in a nearby city being driven daily, and hidden at night behind bushes the thieves cut down. When...
I Have Great News, My 41 Plymouth has been found in tact!!! I don't have it home yet, but I know where it is and as soon as the police release it...
The engine is from a New Yorker with Imperial valve covers, it's painted Hemi orange with flat black valve covers, the paint is peeling and it was...
[attach] [attach]
Help! My 1941 Plymouth 2 door sedan was stolen out of my hobby shop in Troy Alabama sometime last night 5/26/2013, it is powered by a 1956 354...
Hey George!
You can use a small block MOPAR dist, electronic or point type in the 241 and 270 Dodge Hemi's without an adapter, the 331 will have to have an...
At least mine had a circle with the M, I looked back at yours and it looks like it has been ground off, sorry.
The first photo is an old Mallory high output coil, notice the circle with the M in it, I ran one on my first Street Rod engine.
[attach] [attach] [attach] [attach]
I started out with a 47 Plymouth club coupe, I built everything myself from many different cars, when I went to register it I explained how I put...
Another fender well header that use to be very popular is for the 55 - 57 Chevy, I have used these on several different cars running SBC's years...
It's worth $150 to have for display! But it turns over, yes all early Hemi's are expensive to build, the COOL factor is worth a LOT! I sold a 241...
If the coil wires were removed and you hooked them up like a negative ground system, the wires are probably reversed, take the one going to the...
Have some fun! Make your own, this started as a fun project but it actually works well.Yes it takes up a lot of room, I used an old water cooler,...
Here's a nice Studebaker powered Rockne. Studebaker had a factory dual four barrel option engine called the R-3 and R-4, sometimes these manifolds...
The original mounting bracket bolts to the left side, two bolts go through the top water pump holes and one into a threaded boss in the intake...
I've been to the NSRA SR Nationals in Oklahoma City, Columbus, Ohio, Knoxville, TN, Tampa, FL, several times each and Syracuse, NY, and from...
4/16-17-18, Jackson, TN. 18th annual BunnyRun Rod & Custom show, www.jacksonrodandcustom.com for info. I would go but I'll be at the Sunny...
I've been going to the November and February meets for years, we have tried all around and prefer Thomasville, it's about the same distance as the...
This one was raced around 1960 by a friend's father, they just pulled it out of the woods a year ago, got the same 348 running again and have been...
Separate names with a comma.
The Jalopy Journal
