The Jalopy Journal
drag strip is in the plans for the complex. Along with mechanics shops motels, and a dealership.
bingo
there are kits availible to fit a later model power steering box to your truck from classicparts.com its pn. 76-977
patiently waiting.
congrats
for about half of what cenpen(which is a tube axle) costs you could pm loudpedal and see if he still drops these axles, he did mine.
My first name is Brenden and I second that remark. You already have a last name that he will have to spell all his life the least you could do is...
two might be too much. When you double the diameter of a circle you are nearly quadrupiling the area.
I did alot of research before having my axle dropped instead of flipping it. several who did this ended up changing it because problems like...
who did your windshield, was it someone local? wanting something similar for my truck.
Thanks will do.
is it ok to bend in place or should it be removed from the steering box?
would bending the pitman be better than bending the draglink. The pitman appears to be cast
The following are true: 1: I am putting a 3" dropped axle into a 50 chevy half ton. 2: I spaced the steering box away from the frame 2" due to a...
I bought a set of bits at an Ace Hardware it contained about 150 bits including clutch head, came with an adapter for 1/4 inch ratchet
I had to cut about 1/4" out around the steering column to get my spacer between the steering box and frame, so that the column would bolt back up...
I used a kit I believe from chassis engineering, went really well. The trany crossmember bolted up to existing holes, the motor mounts had to be...
no apology needed, honestly I thought I was taking the cheap way out. As the process went on I realized just how much I had invested.
may be traditional but definately not cheap. By the time I do brakes, rebuild springs, new kingpins, had the axle dropped(loudpedal did a fine...
if a 57 is anything like a 50 it has a factory drop of about 6 inches so that would require a REALLY tall spring.
the only parts not already being repoped are the a pillars and the drip rails. doors, firewalls, cowls, the entire rear of cab, roofs are all...
$25
I'll second that my wife got me one 4 years ago and I've used the hell out of it and it works great for a cheapy.
mine has the radio delete but it would be above the heater and out the dash at about a 45 degree angle centered 3 inches from the windsheild.
mine's out of a 75 buick skylark. flange to flange was the same measurement as stock.
I've seen them bring around 3k
the failure of the liner may not of had anything to do with ethanol it may have just been a crappy lining product like kreem. Ethanol is not what...
If this bike is in near stock condition they are very desirable to collectors. It might pay to ebay it and use the proceeds to go after another bike.
oh yeah and from one nebraska boy to another welcome back sorta.
the cummins is probably way too heavy, the late model hemi will probably be way expensive/not traditional/hard to install, early hemi will be...
Separate names with a comma.
The Jalopy Journal
