The Jalopy Journal
I HAVE ALWAYS WONDERED ABOUT TOO ,WHY NOT USE THE MATCHING PUMP? MAYBE THERE IS AN ANSWER THAT IS NOT OBVIOUS
CHANEL THE BODY, THEN NOTHING ELSE HAS TO MOVE
WHAT BETTER WAY TO GET RID OF OLD BEER CANS, AND THE ALUMINUM WOULD BE CLEANER, JUST BE SURE THEY ARE COMPLETELY DRY
MAKE SURE NNOTHING IS ON. TAKE CABLE, EITHER ONE, OFF. CHARGE BATTERY, TOUCH REMOVED CABLE BACK ONTO THE BATTERY TERMINAL, WATCH FOR ANY...
THE 54 IS NEARLY IDENTICLE TO THE 54 CHEVY.. THESE ARE EASY TO REBUILD PARTS ARE CHEAP, AND LOTS OF TIMES SOMEONE WILL HAVE NOS ON EBAY REALLY...
MOST OFF THE MOUSE SMELL WILL PROBABLY GO OUT WITH THE CARPET. LOOK UP AND UNDER THE SEATS , PROBABLY BUILT NEST UP IN THE COIL SPRINGS USING...
If distributor is suspect, the later model HEI self contained work really good and will eliminate a worn shaft problem
Hey I drive a 48 Chubby Cabriolet,nearly same car, am always interested in what others do with this body
I have made new drip rails for a 31 victoria, they came out nice and precise.. My question is, i need to bend a large radius to coincide with the...
Sounds like you have neutral safety switch on the transmission, and the brake energises it when the pedal is down, especially if you do not have...
I think i would rather lose a hubcap than have a valve cap holding the wheel cover on long enough to rip the valve stem out and losing a tire also
A rodder is right, turn signals look like they are working when it is actually the tailiights when the headlights come on they are using...
I took a stock sbc air cleaner, and cut off the outside edge of the top cover off until it just cleared the airfilter,then blocked off the...
I have goodyears that were not real white when purcahsed. I have used everything known to man including sand paper. These tires will not come...
i have the incredible shrinking disc, and i have mixed success with it, and i read about all these guys apparently having such good luck with it...
about ten years ago, I was running a straight no muffler exhaust on my pickup truck. I was in Frederick, Md with my neighbor following me .Some...
I found new door window frames on ebay the seller listed them as fitting Oldmobile and Buick, I need them for a 48 chevy. I am pretty sure they...
I have been looking for front door glass frames for a 1948 chevy cabriolet[convertible], and have found some new ones on ebay. The seller says...
]i just want some opinions on the chicago [hf] stud welding gun.i found just a couple reports, and they were not bad, just that the studs were not...
Iam not a knowlegable hemi guy, but a good freind of mine is, and some where he found an adapater for his small hemi that allowed him to use a...
I am not interested but the guy with the T is . He is in Powatan Va .I will check with him to see if he is serious if so I will try to get back...
When my DAD passed I got his 1937 chevy two door.He restored it 40 years ago, not fancy but a nice passable job , it held up well. Two years...
I was told today that the 1928 chevy head is quit valuable to model t builders as a speed option??? Is there any fact as to value?. I have a...
Im restoring a 29 T for a friend, and he mentioned the fact that a 1928 chevy head will fit a T engine, and is a good trick for more HP. Then he...
Has any one ever used the toyota power steering box and pump from the live axle 4wd p/u . I want to retain the straight axle, and hopefully...
the 1949 to 1954 car drums are a perfect fit on the truck , you need to use hub, drums ,bearings, and the grease retainer plate, no holes to...
If you use 55 on up chevy wheels, all baby moons will fit the wheels, I do not know of any baby moons that will fit the wheels you have that have...
Separate names with a comma.
The Jalopy Journal