The Jalopy Journal
few more..... Grind to fit, caulk to cover.... Uglier than a bucket full of old armpits And from dear old dad (said often to me in my...
Go right over it with the evercoat....looks like you have a hew high spots to tap down first...
Keep an eye on craigslist, just picked up a 110v lincoln with regulator and bottle as a back up unit... less that two bills......and stick with...
All the time...works great........wax and grease remover followed by glass cleaner then tack cloth
Paint isn't going to hide bad work.....bright, light or flat colors will make it less obvious, but you will still see every flaw and it will be a...
one more for the pile....... [img]
It started out looking clean and orderly..... [img] fast forward a couple of months..... [img] [img]
Hahahaha
Liked and shared........ Steve Oleksy
+ 1 on the Imron.........+1 to using a freash air system with it too...........just got a gallon of Nasons "just as good as...." about half the...
Mercedes had a color like that......DB350
Just to add my two cents.........If, after the employee leaves some of his work were to comes back, the shop is on the hook for the re-do....have...
the pipe roller works great, if you can get it lifted high enough with a cherry picker, bolt some 4x4's to the bottom, more surface to work with...
Subscribed :p
here goes nuthin........ [img]
you will dress and redress them many times over their life...no reason not to start with them now......even on high end hammers you will end up...
Very slick
+1 to what's already been said, pulling those kind of horses from a flatty is an expensive proposition.....that being said they're cool as hell...
Might be just as easy to get some cheap fabric (muslin?) lay it on your seat, pin and cut till your happy with the fit and use that as your...
not sure about "favorite" but these have more hours on them than any others [IMG]
This pile of parts is next in line after the '49 is finished (which in turn is waiting for customers cars to get done) [img] [img] [img]
Wicked!
Haven't ordered from them yet but heard good things about this supplier..... just about ready for a new belt on mine too http://www.pagebelting.com/
Cool! Thanks!
Chrome won't get ya home, but BLACK always makes it back! Great thread!!!!!
Not sure about early OHV fours, but those 2.3 engines are easy enough to come by, and with a little work they can build some power.....might be...
I just braze them closed, a little hammer and dolly to flatten in down and a quick pass with the grinder
3M panel bond can be used to adhere patches....not sure how it would hold up in the long run though, plus by the time you add up the cost of the...
I've used come-a-long for engines and other less than brilliant lifting operations...scared the sh*t out of myself too...if it's all you have, it...
...a little different going form practicing to real steel....but kudos for the first time work! Like any other discipline the more you stripe the...
Separate names with a comma.
The Jalopy Journal
